To Next PageTo Next PageHow to improve phone sound quality on Kenwood DDX630WBT Car Video System?
If the phone sound quality is poor on your Kenwood Car Video System, reduce the distance between the unit and the Bluetooth mobile phone. Move the car to a place where you can get a better signal reception.
Why is sound interrupted while playing a track on Kenwood Car Video System?
If sound is sometimes interrupted while playing a track on your Kenwood Car Video System, the tracks may not be properly copied into the USB device. Copy the tracks again and try again.
What does 'Reading...' flashing mean on Kenwood DDX630WBT?
If “Reading...” keeps flashing on the screen of your Kenwood Car Video System, turn the power off and on again.
Why can't I play videos on my Kenwood DDX630WBT?
If videos cannot be played or there is no sound from videos on your Kenwood Car Video System, connect USB Audio and Video cable KCA-iP202, as other cables cannot be used. Select for .
How to synchronize sound with video on Kenwood DDX630WBT Car Video System?
If the sound does not synchronize with the video on your Kenwood Car Video System, select for .
Why are no operations available when playing back a track containing Artwork on Kenwood Car Video System?
When playing back a track containing Artwork on your Kenwood Car Video System, operate the unit after the Artwork is loaded if no operations are available.
What to do if Kenwood DDX630WBT Car Video System shows 'Miswiring DC Offset Error'?
If your Kenwood Car Video System displays a “Miswiring DC Offset Error” or “Warning DC Offset Error”, it means a speaker cord has shorted or come into contact with the car chassis. To fix this, wire or insulate the speaker cord appropriately and then reset the unit.
Why is the sound distorted on my Kenwood DDX630WBT Car Video System?
If the sound is distorted on your Kenwood Car Video System, deactivate the equalizer either on the unit or the iPod/iPhone.
What to do if iPod/iPhone does not work with Kenwood Car Video System?
If your iPod or iPhone does not turn on or work with your Kenwood Car Video System, check the connecting cable and its connection. Update the firmware version. Charge the battery. Check whether the iPod control mode is correctly selected and reset the iPod or iPhone.
Why is there no sound from my Kenwood DDX630WBT when using iPod?
If no sound comes out of the speakers when using an iPod or iPhone with your Kenwood Car Video System, disconnect the iPod or iPhone and then connect it again. Alternatively, select another source and then reselect 'iPod'.
General| Brand | Kenwood |
|---|---|
| Model | DDX630WBT |
| Category | Car Video System |
| Language | English |
Procedure for resetting the unit to factory settings.
Explains manual conventions and symbols for better understanding.
Guides through initial setup, language, AV input, and panel color.
Instructions on how to change the monitor panel's angle.
Instructions on powering the unit on, off, and entering standby mode.
How to adjust audio volume and temporarily reduce sound.
Explains touch controls for video playback and source selection.
Guide to choosing different audio/video sources.
How to access and use source control screens.
Instructions for inserting, playing, and ejecting discs.
Procedure to close the monitor panel after disc removal.
How to navigate and select files from lists.
How to set repeat and random playback modes.
How to play files from a USB storage device.
Steps to prepare for connecting an iPod/iPhone and configure settings.
How to view station information and configure the antenna.
Adjusting the frequency interval for tuning.
How to automatically store and manually save radio stations.
How to search for radio programs using PTY codes.
How to connect and use external components via AV-IN.
How to adjust sound equalization for different sources and select modes.
How to change button colors and create custom color settings.
How to adjust picture quality settings like brightness and contrast.
Steps to enable and view the rear camera image.
How to assign functions to steering wheel remote buttons.
How to reset steering remote controller settings.
How to save, recall, and prevent settings from being changed.
Calibrating the touch panel for accurate input.
General information and precautions for Bluetooth usage and preparation.
Procedure for pairing new Bluetooth devices and changing PIN.
How to connect or disconnect previously paired devices.
How to remove a paired Bluetooth device.
How to handle incoming calls, adjust microphone, and check text messages.
How to save frequently used numbers and transfer phonebook entries.
How to remove saved numbers and information on compatible phones.
Introduction to the remote controller, its modes, and battery installation.
How to search for tracks/files, play, pause, stop, and navigate DVD/VCD menus.
Controls for subtitle, zoom, picture angle, audio, and folder search on discs.
Controls for track search, playback, and direct search for music files.
Band switching, station selection, seek modes, and direct tuning for radio.
Music/Video search, playback, folder/file search for iPod and USB.
General maintenance advice for the unit and proper handling of discs.
List of included accessories and step-by-step guide for installing the unit.
Specific installation instructions for the unit and microphone.
Manual and technical specifications for the USB Bluetooth Adapter.
