Basic Operations
11English
Calendar/clock settings
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [User Interface].
User Interface screen appears.
4
Set each item as follows.
Scroll the page to show the item.
■ Clock
GPS-SYNC (Default): Synchronizes the clock
time with the GPS.
Manual: Sets the clock manually.
■ Time Zone
If you have selected [Manual] for Clock,
select the time zone.
■ Clock Adjust
If you select [Manual] for Clock, adjust the
date and time manually. (P.59)
Adjusting the volume
To adjust the volume (0 to 40),
Press [R] to increase, and press [S] to decrease.
Holding [R] increases the volume continuously
to level 15.
Monitor Angle Control ( )
You can adjust the position of the monitor.
1
Press the [G] button.
Angle Adjust screen appears.
2
Select a below number that represents
your desired angle setting.
Default is “0”.
■ Off Position
You can store the current monitor angle as
the angle during power off. Touch [Memory]
when the desired angle is selected.
To Next Page
Loading...
Need help?
General
