Kenwood DMX8019DABS User Manual

APPS
21English
APPS
Wireless Mirroring Operation
You can display the same screen of the
Android device on the monitor of the unit
using the Wireless Mirroring function of the
Android device.
Preparation
• You can use the Wireless Mirroring function with
Android devices compatible with this function.
• This function may be called Wireless Display,
Screen Mirroring, AllShare Cast, etc., depending
on the manufacturer.
• The settings on the Android device differ
depending on the device type. For details, refer
to the instruction manual supplied with your
Android device.
• If your Android device is locked, Mirroring screen
may not appear.
• If the Android device is not ready for UIBC, you
cannot perform touch operation.
1
Press the [HOME] button.
2
Touch [ ].
3
Touch [Wireless Mirroring]. (P.13)
 The App screen is displayed.
4
Operate your Android device to activate
the Wireless Mirroring function, then
connect to this unit.
5
Select (”DMX8190DABS”) as the network
to use.
 When the connection is established,
then the same screen displayed on the
Android device is displayed.
NOTE
• Apps is discontinued when the power is turned
ON/OFF or you leave the vehicle. To restart Apps,
operate the Android device.
• When the Apps source is displayed, you cannot
register or reconnect a Bluetooth device. Switch
the Apps source to another source, and then
operate the Bluetooth device.
Apple CarPlay Operation
Apple CarPlay is a smarter, safer way to use
your iPhone in the car. Apple CarPlay takes
the things you want to do with iPhone while
driving and displays them on the screen of
the product. You can get directions, make
calls, send and receive messages, and listen to
the music from iPhone while driving. You can
also use Siri voice control to make it easier to
operate iPhone.
For details about Apple CarPlay, visit https://
apple.com/ios/carplay/.
Compatible iPhone devices
You can use Apple CarPlay with the following
iPhone models.
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
Ñ Connecting an iPhone
Wired connection
1
Connect your iPhone using KCA-iP103 via
the USB (Black) terminal. (P.84)
When an iPhone compatible with Apple
CarPlay is connected to the USB (Black)
terminal, the Bluetooth Hands-Free phone
currently connected is disconnected. If the
Bluetooth Hands-Free phone is being used,
disconnection will occur after ending the
call.
2
Unlock your iPhone.

Kenwood DMX8019DABS Specifications

General

Display type	TFT
Built-in display	Yes
Display diagonal	6.95 \
Display resolution	800 x 480 pixels
DIN size	2 DIN
Output power	200 W
Product color	Black
Frequency range	20 - 88000 Hz
Disc types supported	No
Audio output channels	4.0 channels
Equalizer bands quantity	13
Maximum power per channel	50 W
Analog signal format system	NTSC, PAL
Signal-to-Noise Ratio (SNR)	98.5 dB
USB version	2.0
Bluetooth range	10 m
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, PBAP, SPP
Line outputs (RCA)	1
USB ports quantity	2
USB direct playback	-
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Video formats supported	H.264, MKV, MPEG1, MPEG2, MPEG4, WMV
AM band range	531 - 1701 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, DAB, DAB+, FM
Operating temperature (T-T)	-10 - 60 °C
Cables included	DC, USB

Weight and Dimensions

Depth	153 mm
Width	182 mm
Height	112 mm
Weight	1700 g