EasyManuals Logo

Kenwood DMX8019DABS User Manual

Kenwood DMX8019DABS
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Troubleshooting
87English
USB device over current status detected.
The connected USB device is rated a current capacity
higher than the allowable limit.
Check the USB device. Some trouble may have
occurred to the connected USB device.
Change the source to any source other than USB.
Remove the USB device.
Ñ Apple CarPlay
The speed sensor must be connected to use
Apple CarPlay wirelessly. Please verify the proper
connections or plug in by USB to use Apple
CarPlay.
The speed pulse is not detected when the Apple
CarPlay is started by connecting wirelessly or when
the iPhone compatible with wireless Apple CarPlay is
registered in [Apple CarPlay Device List].
Check the connection of the speed pulse or plug in
over USB to use Apple CarPlay.
The GPS antenna must be connected to use
Apple CarPlay wirelessly. Please verify the proper
connections or plug in by USB to use Apple
CarPlay.
The GPS antenna is not connected when the Apple
CarPlay is started by connecting wirelessly or when
the iPhone compatible with wireless Apple CarPlay is
registered in [Apple CarPlay Device List].
Check the connection of the GPS antenna or plug in
over USB to use Apple CarPlay.
The speed sensor and the GPS antenna must be
connected to use Apple CarPlay wirelessly. Please
verify the proper connections or plug in by USB to
use Apple CarPlay.
The speed pulse is not detected and the GPS antenna
is not connected when the Apple CarPlay is started by
connecting wirelessly or when the iPhone compatible
with wireless Apple CarPlay is registered in [Apple
CarPlay Device List].
Check the connection of the speed pulse and the
GPS antenna or plug in over USB to use Apple
CarPlay.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood DMX8019DABS and is the answer not in the manual?

Kenwood DMX8019DABS Specifications

General IconGeneral
Display typeTFT
Built-in displayYes
Display diagonal6.95 \
Display resolution800 x 480 pixels
DIN size2 DIN
Output power200 W
Product colorBlack
Frequency range20 - 88000 Hz
Disc types supportedNo
Audio output channels4.0 channels
Equalizer bands quantity13
Maximum power per channel50 W
Analog signal format systemNTSC, PAL
Signal-to-Noise Ratio (SNR)98.5 dB
USB version2.0
Bluetooth range10 m
Bluetooth version5.0
Bluetooth profilesA2DP, AVRCP, HFP, PBAP, SPP
Line outputs (RCA)1
USB ports quantity2
USB direct playback-
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Video formats supportedH.264, MKV, MPEG1, MPEG2, MPEG4, WMV
AM band range531 - 1701 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, DAB, DAB+, FM
Operating temperature (T-T)-10 - 60 °C
Cables includedDC, USB
Weight and Dimensions IconWeight and Dimensions
Depth153 mm
Width182 mm
Height112 mm
Weight1700 g

Related product manuals