To Next PageTo Next PageWhat to do if there is no output from the subwoofer on Kenwood Car Navigation system?
If there is no output from the subwoofer in your Kenwood Car Navigation system, the subwoofer might not be activated. To resolve this, ensure that the subwoofer is set to 'on'.
Why I cannot adjust the volume of the rear speakers on my Kenwood DNN9350BT Car Navigation system?
If you're unable to adjust the volume of the rear speakers in your Kenwood Car Navigation system, it's possible that the dual zone function is disabled. To fix this, turn the dual zone function to 'on'.
Why I cannot set up the equalizer on my Kenwood DNN9350BT Car Navigation system?
If you cannot set up the equalizer on your Kenwood Car Navigation system, it might be because the dual zone function is enabled. Turn the dual zone function to 'off' to set up the equalizer.
What to do if I cannot select the output destination of the subsource in the dual zone on Kenwood Car Navigation system?
If you cannot select the output destination of the subsource in the dual zone on your Kenwood Car Navigation system, the dual zone function might be disabled. Set the dual zone function to 'on'.
Why I cannot set up the crossover network on my Kenwood DNN9350BT?
If you're unable to set up the crossover network on your Kenwood Car Navigation system, it's possible the dual zone function is enabled. Turn the dual zone function to 'off'.
What to do if the sound skips when an audio file is being played on Kenwood Car Navigation system?
If the sound skips when playing an audio file on your Kenwood Car Navigation system, it could be due to a scratched or dirty disc. Try cleaning the disc. Alternatively, the recording condition might be poor, so re-record the file or use a different disc.
What to do if the specified disc does not play on Kenwood DNN9350BT Car Navigation system?
If the specified disc doesn't play on your Kenwood Car Navigation system, but another one does, it might be because the disc is dirty. You should clean the disc. Alternatively, the disc could be severely scratched, in which case you should try a different disc.
Why I cannot select a folder on my Kenwood DNN9350BT Car Navigation system?
If you cannot select a folder on your Kenwood Car Navigation system, the random play function might be enabled. Turn off the random function.
Why I cannot perform repeat play during VCD playback on Kenwood DNN9350BT Car Navigation system?
If you cannot perform repeat play during VCD playback on your Kenwood Car Navigation system, the PBC function might be enabled. Turn off the PBC function.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| GPS Navigation | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Max Power Output | 50W x 4 |
| DVD Player | Yes |
| SD Card Slot | Yes |
| Apple CarPlay | Yes |
| Android Auto | Yes |
| HD Radio | Yes |
| SiriusXM Ready | Yes |
| AM/FM Tuner | Yes |
| Audio Formats Supported | MP3, WMA, AAC, WAV |
| Video Formats Supported | MPEG-1, MPEG-2, MPEG-4, WMV |
| USB Ports | Yes, 2 |
