To Next PageTo Next PageWhy does my Kenwood DNX4150DAB Car Navigation system say 'No Media file'?
If your Kenwood Car Navigation system shows 'No Media file,' it means the connected USB device doesn't have any playable audio files, or the media being played doesn’t have data the unit can play. Try another USB device.
What does 'USB Device Error!!' mean on my Kenwood DNX4150DAB Car Navigation system?
If your Kenwood Car Navigation system displays 'USB Device Error!!', the connected USB device may be drawing too much power or there may be a problem with the device itself. Check the USB device, and try changing the source to something other than USB and then removing the USB device.
What does 'Error Message Disconnected (iPod)' mean on my Kenwood DNX4150DAB?
If your Kenwood Car Navigation system displays 'Error Message Disconnected (iPod)', the system is set to play from an iPod/Bluetooth audio player, but none is connected. Change the source to something else, connect your iPod/Bluetooth audio player, and then switch back to the iPod/Bluetooth source.
Why does my Kenwood DNX4150DAB say 'Update your iPod'?
If your Kenwood Car Navigation system shows 'Update your iPod,' it means the iPod's software is too old for the unit to support. Confirm that the software for the iPod is the latest version.
What does 'Mecha Error' mean on my Kenwood Car Navigation system and how to fix it?
If your Kenwood Car Navigation system displays 'Mecha Error,' it indicates a disc player malfunction. Eject the disc and try reinserting it.
What does 'Disc Error' mean on my Kenwood Car Navigation system?
If your Kenwood Car Navigation system displays 'Disc Error,' it means the disc you inserted is unplayable. Try changing the disc.
What to do if my Kenwood DNX4150DAB says 'Read Error'?
If your Kenwood Car Navigation system is showing 'Read Error', it could be due to a dirty disc or the disc being inserted upside down. Clean the disc, or load it with the labeled side facing up.
Why does my Kenwood Car Navigation system say 'Hot Error' and what should I do?
If your Kenwood Car Navigation system displays a 'Hot Error,' it means the internal temperature has risen to 60°C or higher, activating the protection circuit. The solution is to let the unit cool down before using it again.
What to do if I get an 'Error Message Protect' on my Kenwood Car Navigation system?
If you see a 'Protect' error message on your Kenwood Car Navigation system, it means the protective circuit has been activated. This usually happens when a speaker cord has shorted or is touching the car's metal frame. To fix this, carefully check the speaker cords, make sure they are properly wired and insulated, and then press the Reset button on your device.
Why can't I set up the high pass filter on my Kenwood Car Navigation system?
If you cannot set up the high pass filter on your Kenwood Car Navigation system, it is because the subwoofer is not set to 'on'. Set the subwoofer to 'on'.
General| MP3 playback | Yes |
|---|---|
| Audio decoders | Dolby Digital |
| Playback disc formats | CD audio, CD video |
| Audio formats supported | AAC, FLAC, WAV, WMA |
| Image formats supported | JPG |
| Video formats supported | DIVX, H.264, MKV, MPEG1, MPEG2, MPEG4 |
| AM band range | 531 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 24 |
| Clock mode | 24h |
| Product color | Black |
| DVD region code | 2 |
| Disc types supported | CD-DA, CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 7 |
| Maximum power per channel | 50 W |
| Analog signal format system | NTSC, PAL |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Aspect ratio | 5:3 |
| Display type | LED |
| Display diagonal | 6.1 \ |
| Display resolution | 800 x 480 pixels |
| Display size (HxV) | 136.2 x 72 mm |
| Rear-view camera ready | No |
| Number of OSD languages | 21 |
| Bluetooth version | 3.0+HS |
| Bluetooth profiles | A2DP, AVRCP, GAP, HFP, HID, MAP, SDP, SPP |
| Line outputs (RCA) | 3 |
| Compatible memory cards | SDHC |
| Connector(s) | HDMI/MHL |
| Output voltage | 14.4 V |
| Disc playback modes | Random, Repeat track |
| Key illumination color | Multi |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 2000 g |
|---|---|
| Dimensions (WxDxH) | 182 x 156 x 112 mm |
General warnings to prevent injury, fire, and damage to the unit.
Guidelines for disc handling, cleaning the unit, and preventing lens fogging.
Explains structural components of the manual for clarity and navigation.
Details the purpose and operation of each button on the unit's front panel.
Step-by-step guide on inserting and ejecting an SD card from the unit.
Provides detailed explanations for each numbered button on the unit's front panel.
Instructions on how to power the unit on and off, including initial setup requirements.
Guides through the initial setup process, including locale, language, angle, and color settings.
Details how to configure camera settings and the demonstration mode during initial setup.
Instructions for inserting and playing music CDs and other disc media.
Steps to connect and play content from USB devices, iPods, and SD cards.
How to connect and use HDMI/MHL devices and a TV tuner for media playback.
Instructions on how to detach and reattach the front panel of the DNX7150DAB unit.
How to access the HOME screen and navigate through its functions.
Guide on rearranging source icons to personalize the HOME screen layout.
Explains how to access and use the popup menu and common general functions.
Describes common keys in list screens and how to use flick scrolling for navigation.
Instructions on how to display the navigation screen and control audio from it.
How to use INRIX traffic information and weather forecasts via smartphone app.
Explains basic controls, playback, function panels, and menus for DVD/VCD.
Covers DVD setup options like language, parental level, and disc settings.
General operation for music, video, pictures, and disc media playback.
Connecting and setting up USB, SD card, iPod, and DivX devices.
Detailed guides for Aha, AUPEO!, and general app operations on smartphones.
Covers basic radio functions, digital radio, and controls.
How to tune, store, select, and search for radio stations and programs.
Details traffic info, replay, tuner setup, digital radio setup, and announcements.
Covers specifications, registration, connection, and PIN code management for Bluetooth devices.
Guides on playing Bluetooth audio, using hands-free functions, and voice recognition.
Adjusting monitor screen, panel colors, and background images.
Configuring system settings, user interface, touch panel, language, and security.
Setting up navigation, camera, software, AV inputs, and AV outputs.
Setting audio parameters, selecting speakers, and configuring crossover networks.
Adjusting equalizer, zone control, sound effects, and listening position.
Covers battery installation, button functions, operation modes, and direct search.
Tables for common issues, causes, solutions, and error message explanations.
Instructions on how to reset the unit to its factory default settings to resolve operational issues.
Lists all playable discs, audio, video, and picture file formats supported by the unit.
Information on connectable devices, USB/SD card usage, and unit technical specifications.
Details status bar indicators, region codes, language codes, and comprehensive unit specifications.
Legal information regarding trademarks, logos, and copyright protection for the unit and its software.
