C
Colleen ThomasSep 16, 2025
What does No Media file mean on my Kenwood DNX5350DAB?
- RRobert BergerSep 16, 2025
The message “No Media file” indicates that the connected USB device contains no playable audio file. Try another USB device.
To Next PageTo Next PageWhat does No Media file mean on my Kenwood DNX5350DAB?
The message “No Media file” indicates that the connected USB device contains no playable audio file. Try another USB device.
What to do if Kenwood DNX5350DAB GPS radio reception is poor?
If you're experiencing poor radio reception with your Kenwood GPS, make sure the car antenna is fully extended. Also, check that the antenna control wire is correctly connected.
What does Error Message Protect mean on my Kenwood DNX5350DAB?
The “Error Message Protect” indicates that the protective circuit has been activated because a speaker cord has shorted or is in contact with the car chassis. You should wire or insulate the speaker cord as needed and then push the Reset button.
What does Mecha Error mean on my Kenwood DNX5350DAB GPS?
A “Mecha Error” indicates that the disc player is malfunctioning. Eject the disc and try inserting it again. If the error continues or the disc cannot be ejected, contact the Kenwood dealer.
What does Disc Error mean on my Kenwood DNX5350DAB?
A “Disc Error” message means that an unplayable disc has been inserted. Try changing the disc.
What does No Device mean on my Kenwood GPS?
The message “No Device” means that the USB device is selected as a source although no USB device is connected. Change the source to any source other than USB/iPod. Connect a USB device, and change the source to USB again.
What does Parental Level Error mean on my Kenwood GPS?
A “Parental Level Error” indicates that the disc you are trying to play has a higher level than the parental level you have set. Set the parental level.
What does Region Code Error mean on my Kenwood DNX5350DAB?
A “Region Code Error” indicates that the disc you are trying to play has a region code that is not compatible with the unit. Try another disc.
Why can't I set up the low pass filter on my Kenwood DNX5350DAB?
If you cannot set up the low pass filter, it may be because the subwoofer is not turned on. Set the subwoofer to on.
Why is there no output from the subwoofer on my Kenwood GPS?
If there is no output from the subwoofer, it may not be turned on. Set the subwoofer to on.
General| Resolution | 800 x 480 pixels |
|---|---|
| GPS Navigation | Yes |
| DAB Radio | Yes |
| Bluetooth | Yes |
| Audio Formats Supported | MP3, WMA, AAC, FLAC |
| Touchscreen | Yes |
| Apple CarPlay | No |
| Android Auto | No |
| AUX Input | Yes |
| Steering Wheel Control | Yes |
| Voice Control | Yes |
| DVD Playback | Yes |
| CD Playback | Yes |
| SD Card Slot | Yes |
| USB Ports | 1 |
