Kenwood DNX576S User Manual

Bluetooth Control
74
8
Select the function you want to use.
■ HFP [Hands Free1]/[Hands Free2]/[No
Connection.]
Select the hands-free number to connect.
■ A2DP/SPP [Audio/App]
Select if you want to use the audio player
app in your smartphone over A2DP, and the
other apps in your smartphone over SPP.
■ PBAP [Phonebook DL]
Select if you want to transfer your
phonebook data.
9
Touch [Ye s ].
When data transmission and connection
have completed, the Bluetooth connection
icon appears on the screen.
NOTE
• When registering the iPhone that is available for
Apple CarPlay wirelessly, a confirmation message
appears.
– [Ye s ]: Displays the Apple CarPlay screen for
wireless connection.
– [No]: Apple CarPlay is not connected. When
using Apple CarPlay, see Select an Apple
CarPlay device (P.36).
Bluetooth Setup
NOTE
• The Bluetooth Setup is disabled while using
Apple CarPlay.
1
Press the [MENU]/[ ] button.
 Popup menu appears.
2
Touch [SETUP].
 SETUP Menu screen appears.
3
Touch [Bluetooth].
 Bluetooth SETUP screen appears.
See the following section for each
setting.
• Connect the Bluetooth device (P.74)
• Change the PIN Code (P.75)
• Change the device name (P.75)
Ñ Connect the Bluetooth device
1
Touch [Select Device] on the Bluetooth
Setup screen.
2
Touch the name of the device you want
to connect.
 Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
• You cannot select an Android device connected
as an Android Auto device.
3
Set each profile as follows.
■ [TEL (HFP) 1], [TEL (HFP) 2]
Select when the device is connected with
the unit as hands-free phone 1 or 2.

Kenwood DNX576S Specifications

General

Brand	Kenwood
Model	DNX576S
Category	GPS
Language	English