Do you have a question about the Kenwood DP-R895 and is the answer not in the manual?
dynamic range | More than 94 dB |
---|---|
total harmonic distortion + noise | Less than 0.007 % (at 1 kHz) |
number of channels | 2 channels |
channel separation | More than 90 dB (at 1 kHz) |
playing rotation | 200 rpm - 500 rpm |
frequency response | 4 Hz-20 kHz, ±1.0 dB |
signal to noise ratio | More than 96 dB |
output level/impedance | 2.0 V/3.3 kΩ |
---|---|
D/A conversion | Bit Oversampling 8 fs (352.8 kHz) |
power consumption | low |
width | 440 mm |
---|---|
height | 128 mm |
depth | 392 mm |
weight | 5.0 kg |
Instructions on how to select the correct AC voltage for the unit based on regional power supply.
Essential warnings and guidelines to prevent fire, electric shock, and ensure safe operation of the appliance.
How to select and play specific tracks on a CD.
Guide to programming a custom sequence of tracks from one or more discs for playback.
Instructions on how to add more tracks to an existing programmed playback sequence.
Guides editing from a single disc to optimize tape recording time and track completion.
Allows editing and recording from multiple CDs onto one tape, confirming remaining time.
A troubleshooting guide for common symptoms and their likely causes and remedies.
Detailed technical data for the CD player, including format, D/A conversion, audio, and general dimensions.
Information regarding FCC warnings, Canadian DOC regulations, and laser product safety.