CD-206/ 204 / 2 03/ DPF-R6010/ R4010/ R301 0 (En)
18
1
Press so that the “PGM” indicator
lights.
Repeated playback
To repeat only the programmed tracks
: Keys and controls used in the operations described on this page.
™
Preparation
÷ Load a disc in the CD player.
2
Select the disc.
3
Select the desired track number.
4
Set the entry.
5
Repeat steps 2 – 4 above.
6
Press the REPEAT key.
7
Start playback.
Go to step 3 within 8 seconds.
Go to step 4 within 8 seconds.
For the CD-206/ DPF-R6010
The current status is displayed when the key
is pressed once.
When it is pressed while the status is dis-
played, the repeat ON status can be set to OFF
(or vice versa).
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
P.MODE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
4¢
12
3
45
6
78
9
0 +1 0
P.MODE
REPEAT
6
Main unit Remote control unit
CD-206/DPF-R6010
CD-204/203/DPF-R4010/ R3010
PGM
54321
REPEAT
TRACK NO.
DISC
NO.
PGM
54321
01
3
CD-206/DPF-R6010
CD-204/203/DPF-R4010/ R3010
PGM indicator light up.
REPEAT indicator light up.
REMOTE CONTROL UN IT
RC-P06 01
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
