To Next PageTo Next PageHow to fix poor radio reception on Kenwood DPX505BT?
To improve radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected. Note that static noise may occur while listening to the radio.
Why is my iPod/iPhone not working with my Kenwood DPX505BT?
If your iPod/iPhone is not working with your Kenwood Car Receiver, check the connection between the unit and your device. You can also try disconnecting and resetting the iPod/iPhone using a hard reset.
Why is my Bluetooth device not detected by my Kenwood DPX505BT Car Receiver?
If your Bluetooth device is not being detected by your Kenwood Car Receiver, try searching from the Bluetooth device again. You can also try to reset the unit.
Why can't I pair my Bluetooth device with my Kenwood DPX505BT Car Receiver?
If you are unable to pair your Bluetooth device with your Kenwood Car Receiver, ensure you have entered the same PIN code on both devices. You can also try deleting pairing information from both the unit and the Bluetooth device, then perform pairing again.
Why can't I hear phone calls from the car speakers on my Kenwood DPX505BT?
If you cannot hear phone call sound from the car speakers on your Kenwood Car Receiver, press 6 IW during a call to switch between hands-free and private talk mode.
Why are the characters on my Kenwood DPX505BT Car Receiver display incorrect?
The Kenwood Car Receiver can only display uppercase letters, numbers, and a limited number of symbols. Also, depending on the display language you have selected, some characters may not be displayed correctly.
Why is the phone sound quality poor on my Kenwood DPX505BT Car Receiver?
If the phone sound quality is poor on your Kenwood Car Receiver, try reducing the distance between the unit and the Bluetooth device. Additionally, move the car to a location with better signal reception.
What to do if the disc cannot be ejected from my Kenwood DPX505BT?
If a disc cannot be ejected from your Kenwood Car Receiver, press and hold to forcibly eject the disc, being careful not to drop it. If this doesn't work, you can reset the unit.
What to do if my Kenwood DPX505BT displays “TOC ERROR”?
If your Kenwood Car Receiver displays “TOC ERROR”, make sure the disc is clean and inserted properly.
What to do if my Kenwood DPX505BT Car Receiver displays “NA FILE”?
If your Kenwood Car Receiver displays “NA FILE”, ensure that the media (disc/USB) contains supported audio files.
General| Bluetooth | Yes |
|---|---|
| USB Ports | 1 |
| Auxiliary Input | Yes |
| CD Playback | Yes |
| AM/FM Tuner | Yes |
| Built-in Amplifier | Yes |
| Subwoofer Output | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | Yes |
| SIRI Eyes Free | Yes |
| Android Music Playback | Yes |
| Pandora Control | Yes |
| Spotify Control | Yes |
| Equalizer | Yes |
| Power Output | 50 Watts x 4 Channels |
| DIN Size | 2 DIN |
| EQ | 13-Band |
| Compatible Audio Formats | MP3, WMA, AAC |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| RMS Power Output | 22W x 4 |
| Preamp Voltage | 2.5 volts |
