Need help?Do you have a question about the Kenwood DV-502 and is the answer not in the manual?
D/A Conversion Section| D/A conversion | 24 Bit Oversampling |
|---|---|
| Sampling frequency (8 fs) | 44.1, 48 kHz |
| Sampling frequency (4 fs) | 96 kHz |
Audio Section| Frequency response (Sampling frequency 44.1 kHz) | 4 Hz ~ 20 kHz |
|---|---|
| Frequency response (Sampling frequency 48 kHz) | 4 Hz ~ 22 kHz |
| Frequency response (Sampling frequency 96 kHz) | 4 Hz ~ 42 kHz |
| Signal to noise ratio | More than 98 dB |
| Dynamic range | More than 95 dB |
| Total harmonic distortion | Less than 0.005 % (1 kHz) |
| Channel separation | More than 95 dB (1 kHz) |
| Analog output level/impedance | 2 V / 1 kΩ |
| Digital output level/impedance COAXIAL | 0.5 Vp-p / 75 Ω |
| Digital output level/impedance OPTICAL | -21 dBm ~ -15 dBm (Wave length 660 nm) |
Video Section| Video output format | NTSC/PAL |
|---|---|
| Video compression DVD | MPEG-2 |
| Composite video output level | 1 Vp-p (75 Ω load, sync. negative) |
| S-video output level (Y-signal) | 1 Vp-p (75 Ω load, sync. negative) |
| S-video output level (C-signal) NTSC | 0.286 Vp-p (75 Ω) |
| S-video output level (C-signal) PAL | 0.300 Vp-p (75 Ω) |
| Horizontal resolution | More than 480 lines |
| Video signal to noise ratio | More than 60 dB |
General| Power consumption | 16 W |
|---|---|
| Dimensions (W) | 440 mm (17-5/16") |
| Dimensions (H) | 109 mm (4-5/16") |
| Dimensions (D) | 325 mm (12-13/16") |
| Weight (net) | 4.0 kg (8.8 lb) |
To Next Page
