Do you have a question about the Kenwood DVF-3070/3070-S and is the answer not in the manual?
frequency response (44.1 kHz) | 4 Hz ~ 20 kHz |
---|---|
frequency response (48 kHz) | 4 Hz ~ 22 kHz |
frequency response (96 kHz) | 4 Hz ~ 38 kHz |
signal to noise ratio | More than 98 dB |
dynamic range | More than 92 dB |
total harmonic distortion | Less than 0.005 % (1 kHz) |
channel separation | More than 95 dB (1 kHz) |
analog output level/impedance | 2 V / 570 |
digital output level/impedance COAXIAL | 0.5 Vp-p / 75 |
digital output level/impedance OPTICAL | -21 dBm ~ -15 dBm (Wave length 660 nm) |
video output format | NTSC/PAL |
---|---|
video compression DVD | MPEG-2 |
composite video output level | 1 Vp-p (75 Ω load, sync. negative) |
s-video output level (Y-signal) | 1 Vp-p (75 Ω load, sync. negative) |
s-video output level (C-signal) NTSC | 0.286 Vp-p (75 ) |
s-video output level (C-signal) PAL | 0.300 Vp-p (75 ) |
component video output level (Y-signal) | 1 Vp-p (75 ) |
component video output level (Cb-signal) | 0.648 Vp-p (75 ) |
component video output level (Cr-signal) | 0.648 Vp-p (75 ) |
RGB output level (SCART) | 0.7 Vp-p (75 ) |
horizontal resolution | More than 480 lines |
video signal to noise ratio | More than 70 dB |
power consumption | 12 W |
---|---|
dimensions (W) | 440 mm |
dimensions (H) | 75 mm |
dimensions (D) | 282 mm |
weight (net) | 3.1 kg |
Warning regarding the critical need to connect the ground line during unit disassembly.
Alerts users to the hazard of laser radiation and the necessity of avoiding direct beam exposure.
List of components with part numbers, descriptions, and destination codes.
Continuation of the parts list, detailing additional components and their specifications.
Further section of the parts list, including more components and their associated data.
Final part of the component list, covering resistors, transistors, and ICs with details.