all other parts
●
Wash by hand, then dry.
●
Alternatively they are dishwasher safe and can be washed on the top rack of
your dishwasher. Avoid placing items on the bottom rack directly over the
heating element. A short low temperature (Maximum 50°C) programme is
recommended.
service & customer care
●
If the cord is damaged it must, for safety reasons, be replaced by Kenwood
or an authorised Kenwood repairer.
●
If you experience any problems with the operation of the
processor, before calling for assistance refer to the
troubleshooting guide.
If you need help with:
●
using your appliance or
●
servicing or repairs
Contact the shop where you bought your appliance.
●
Designed and engineered by Kenwood in the UK
●
Made in China
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste.
It must be taken to a special local authority differentiated waste collection centre
or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
7
troubleshooting guide
Problem Cause Solution
The processor will not operate No power - power on light not lit. Check processor is plugged in.
Bowl not locked on correctly. Check bowl is located and interlocked correctly and the handle is situated
towards the right hand side.
Lid not locked correctly. Check that the lid interlock is located correctly into the handle area.
Large pusher not fitted. Fit the large pusher.
The processor will not operate if the bowl, lid or large pusher
are not interlocked correctly.
If none of the above check the fuse/circuit breaker in
your home.
Processor stops or slows Overload protection operated. Switch off, unplug and allow the appliance to cool down for approximately
during processing Processor overloaded or overheated during 15 minutes.
operation.
Maximum capacity exceeded. Refer to the speed chart for maximum capacities to process.
Poor performance of Refer to hints in relevant “using the attachment” section. Check attachments are assembled correctly.
tools/attachments.
Weighing function
Display screen freezes on [- - - -] Quantity weighed too small. Use teaspoon and tablespoon measures for very small quantities.
Weight changed on display Power unit moved during operation. Do not move unit during use.
screen Zero the display before weighing next ingredients.
Power On light flashing Normal operation Check interlocks are engaged correctly.
The light will flash if the bowl, lid, liquidiser or
mill are not fitted to the power unit or not locked in
place correctly.
Auto and Power On light Normal operation Check interlocks are engaged correctly or press the Auto button to switch
flashing The light will flash if the off the Auto function.
Auto selected but interlocks not engaged.
item suitable for
dishwashing
main, midi & mini bowl, lid, pushers, spatula ✔
liquidiser glass goblet, lid, filler cap ✔
blade unit and seal for liquidiser and mill ✘
glass mill jar ✔
knife blades, dough tool, maxi blend canopy ✔
whisk beaters ✔
whisk drive head ✘
discs ✔
citrus press ✔
centrifugal juicer ✘
weighing tray ✔
detachable drive shaft ✘
juicer drive adaptor ✘
To Next Page
Loading...
Need help?
General
