What to do if my Kenwood Blender processor will not operate?
If your Kenwood Blender's processor isn't working, first ensure it's properly plugged into a power source. Next, verify that the bowl is correctly fitted to the power unit, with the handle positioned on the right-hand side. Also, check that the bowl lid is securely locked into the handle area. If these steps don't resolve the issue, inspect the fuse or circuit breaker in your home.
Why Kenwood Food Processor won't operate?
Your Kenwood Food Processor might not be operating due to several reasons. First, ensure the processor is properly plugged into a power source. Second, check that the bowl is correctly fitted to the power unit, with the handle situated on the right-hand side. Finally, verify that the bowl lid is securely locked. The processor is designed not to start if the bowl and lid are not correctly in place. If these steps don't resolve the issue, inspect the fuse or circuit breaker in your home.
Why is my Kenwood Food Processor liquidiser/mill not working?
The Kenwood Food Processor liquidiser or mill may not operate if it is incorrectly fitted to the interlock or not assembled correctly. Ensure the liquidiser or mill is correctly attached. Also, check that the blade unit is fully tightened into the goblet or jar.
What to do if my Kenwood Blender liquidiser or mini chopper/mill will not operate?
If the Kenwood Blender liquidiser or mini chopper/mill isn't working, it might not be correctly locked on. These attachments won't operate if incorrectly fitted to the interlock. Also, verify that the blade unit is fully tightened into the goblet or jar.
Why is my Kenwood Blender liquidiser or mini chopper/mill leaking from the blade assembly base?
Leakage from the blade assembly base of your Kenwood Blender liquidiser or mini chopper/mill could be due to a missing, incorrectly fitted, or damaged seal. Check the seal to ensure it is correctly fitted and not damaged.
Why my Kenwood FPM260 won't turn on?
If your Kenwood Food Processor isn't operating, there are several things to check: Ensure the processor is properly plugged into a power source. Verify that the bowl is correctly fitted to the power unit, with the handle positioned on the right side. Also, confirm that the lid interlock is correctly engaged in the handle area. The processor will not work if the bowl and lid are not properly aligned. If these steps don't resolve the issue, inspect the fuse or circuit breaker in your home.
What to do if Kenwood FPM260 Food Processor stops during processing?
If your Kenwood Food Processor stops during processing, it may be overloaded or have exceeded its maximum capacity. Refer to the recommended speed chart to ensure you are within the stated limits. Also, verify that the lid is correctly and securely locked in place.
What to do if Kenwood FPM260 Food Processor liquidiser/mill is leaking?
If your Kenwood Food Processor liquidiser or mill is leaking from the blade assembly base, it could be due to a missing, incorrectly fitted, or damaged seal. Check the seal to ensure it is correctly fitted and undamaged. To get a replacement seal you should follow the instructions in the “service & customer care” section.
How to improve the performance of Kenwood Blender tools/attachments?
To improve the performance of your Kenwood Blender tools or attachments, check the relevant 'using the attachment' section for hints. Ensure that the attachments are assembled correctly.
What to do if my Kenwood FPM260 stops during processing?
If your Kenwood Food Processor stops while processing, it could be due to overloading or exceeding the maximum capacities. Refer to the recommended speed chart to ensure you are within the specified limits. Also, check that the lid is securely locked in place.
General| Material | Plastic |
|---|---|
| Number of Speed Settings | 2 |
| Pulse Function | Yes |
| Accessories | Citrus Press, Grater, Slicer |
| Included Accessories | Citrus Press, Grater, Slicer |
To Next Page
