Kenwood KAC-428S User Manual

KENWOOD
KAC-728S
KAC-628
KAC-608S
KAC-428S
INSTRUCTION MANUAL
MODE D’EMPLO!__
AMPLIFICADOR DE POTENCIA ® Page 22-31
MANUAL DE INSTRUCCIONES
KENWOOD CORPORATION
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures willhelp __.
you obtain the best performance from your new power amplifier. .
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. .
Refer to the model and serial numbers whenever you call upon your
KENWOOD dealer for information or service on the product.
Model KAC-728S/628/608S/428S Serial number .
© PRINTED IN USA B64-1359-00 (KM) gee

Kenwood KAC-428S Specifications

General

Channels	2
Signal to Noise Ratio	95 dB
Total Harmonic Distortion (THD)	0.08%
Input Sensitivity	0.2 - 5 V
Input Voltage	14.4V

Summary

Controls

Speaker Output Terminals

Connection

RCA Cable Connection

Speaker Level Input Connection

Speaker Wire Connection

Details on connecting speaker wires for stereo and bridged configurations.

Speaker Selection Guidelines

Criteria for choosing speakers based on power output and impedance.

Power Wire Connection

Instructions for connecting the power supply, ground, and remote control wires.

Installation

Installation Precautions

Important safety and operational advice for installing the amplifier in the vehicle.

Troubleshooting Guide

Common Problems and Solutions

Table detailing common issues like no sound or distorted sound and their respective causes and solutions.

Specifications

Technical Specifications Summary

Detailed specifications for audio performance, current consumption, dimensions, and weight.