To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-6202 and is the answer not in the manual?
Audio Specifications| max power output | 400W |
|---|---|
| rated power output (4Ω, 20Hz~20kHz, 0.08% THD) | 60W x 2 |
| rated power output (2Ω, 1kHz, 0.8% THD) | 100W x 2 |
| bridged power output (4Ω, 1kHz, 0.8% THD) | 200W x 1 |
| frequency response (+0, -3dB) | 10Hz~45kHz |
| sensitivity (rated output) MAX | 0.2V |
| sensitivity (rated output) MIN | 5.0V |
| signal to noise ratio | 100dB |
| input impedance | 10kΩ |
| low pass filter frequency (12dB/oct.) | 50~200Hz (variable) |
| high pass filter frequency (12dB/oct.) | 50~200Hz (variable) |
Power and Consumption| operating voltage | 14.4V (11~16V allowable) |
|---|---|
| current consumption | 25A |
Weight and Dimensions| dimensions (W x H x D) | 330 x 59 x 242 mm (13 x 2-5/16 x 9-8/16 inch) |
|---|---|
| weight | 2.8kg (6.2 lbs) |
Important safety warnings and precautions for installation and operation to prevent hazards.
List of accessories provided with the power amplifier unit.
Guidance on choosing an installation location and essential precautions to prevent damage or accidents.
Explanation of filter settings for audio output and selection of amplifier operation modes.
How to set the input sensitivity to match the source unit's output level.
Description of the power indicator light and its role in indicating unit status.
Details on the amplifier's protection function, its triggers, and how it affects operation.
Identifies and explains the battery, ground, and power control terminals for connecting power.
Details speaker output, line input, RCA ground, and speaker level input terminals.
Outlines the sequence of steps for safely installing the amplifier unit in a vehicle.
Provides essential rules and recommendations for proper wiring to prevent damage and ensure safety.
Guidance on choosing speakers with appropriate impedance and power ratings for the amplifier.
Illustrates how to connect the amplifier using RCA cables from a source unit.
Explains how to connect the amplifier using speaker wires from a source unit.
Diagrams showing stereo and bridged speaker wire connections to the amplifier.
Illustrates the correct connection of power, ground, and control wires to the amplifier.
Example setup for a basic 2-channel stereo system configuration.
Example setup for a high-power 2-channel system using bridged connections.
Example setup for a system combining 2-channel speakers and a bridged subwoofer.
Explanation of how coils and capacitors divide frequencies for tri-mode operation.
Example of calculating capacitor and coil ratings for a specific crossover frequency.
Guide to identify and resolve common issues like no sound, low output, or distorted sound.
