Need help?Do you have a question about the Kenwood KAC-6201 and is the answer not in the manual?
Audio Specifications| rated power output at 4Ω, 20Hz~20kHz | 60W x 2 (0.08% THD) |
|---|---|
| rated power output at 4Ω, DIN45324, +B=14.4V | 60W x 2 |
| rated power output at 2Ω, 1kHz | 75W x 2 (0.8% THD) |
| bridged power at 4Ω, 1kHz | 150W x 1 (0.8% THD) |
| max power output | 350W x 2 |
| low-pass filter | 80Hz (12dB/oct) |
| high-pass filter | 150Hz (12dB/oct) |
| frequency response (+0, -1dB) | 10Hz~45kHz |
| signal-to-noise ratio | 100dB |
| sensitivity (max) | 0.2V (Rated Output) |
| sensitivity (min) | 5.0V (Rated Output) |
| input impedance | 10kΩ |
General Specifications| operating voltage | 14.4V |
|---|---|
| current consumption at 1kHz, 10% THD | 19A |
| dimensions (W x H x D) | 228 x 59 x 228 mm |
| dimensions (W x H x D) inches | 9 x 2-1/4 x 9 inches |
| weight | 2.8kg |
Covers numbered installation steps, warnings, and cautions for proper setup.
Provides guidance on suitable installation locations and related safety notes.
Explanation of various controls like Fuse, Battery terminal, and Speaker terminals.
Table of common problems, possible causes, and solutions for the amplifier.
Crucial warnings to prevent personal injury or fire hazards during use.
Precautions to avoid damaging the unit or vehicle components.
To Next Page
