Need help?Do you have a question about the Kenwood KAC-827 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal to Noise Ratio | 100 dB |
| THD at RMS Power | 0.08% |
| Speaker Level Inputs | Yes |
| Preamp Outputs | Yes |
| Input Sensitivity | 0.2V - 4V |
Critical safety warnings to prevent fire and personal injury during installation and operation.
Precautions to ensure the unit operates correctly and avoid damage.
Guidelines for cleaning the unit and important FCC compliance information.
Step-by-step guide for installing the power amplifier.
Advice on suitable installation places and associated precautions.
Description of the main switches and controls on the amplifier's front panel.
Explanation of various input, output, and power terminals on the rear panel.
Guidance on connecting power supply and speaker output cables.
Instructions for connecting audio sources via RCA cables.
Configuration for a standard 2-channel audio system.
Setting up a system with separate high-pass and low-pass filters.
Examples for integrating a subwoofer into the audio system.
Configuration for a tri-mode operation using coils and capacitors.
Explanation of the unit's protection circuit and indicator lights.
Common symptoms, causes, and remedies for operational issues.
To Next Page
