Do you have a question about the Kenwood KAC-849 and is the answer not in the manual?
rated power output (4 Ω) A, B Channel (20-20KHz, 0.08% THD) | 50W x 4 |
---|---|
rated power output (2 Ω) A, B Channel (1KHz, 0.8% THD) | 75W x 4 |
bridged power output (4 Ω, 1KHz, 0.8% THD) | 150W x 2 |
max power output (4 Ω, Normal) | 100W x 4 |
max power output (4 Ω, Bridge) | 300W x 2 |
low pass filter (A, B channel, 12dB/oct.) | 50Hz - 200Hz |
high pass filter (A, B channel, 12dB/oct.) | 50Hz - 200Hz |
bass boost circuit (90Hz) | 0.6dB |
frequency response (+0, -3dB) | 5Hz - 50KHz |
signal to noise ratio | 100dB |
sensitivity (Max) (rated output) | 0.2V |
sensitivity (Min) (rated output) | 5.0V |
input impedance | 10KΩ |
operating voltage (11V-16V allowable) | 14.4V |
---|---|
current consumption (1KHz, 10% THD) | 31A |
dimensions (Width x Height x Depth) | 261mm x 57mm x 256mm |
weight | 3.5Kg |