Need help?Do you have a question about the Kenwood KAC-859 and is the answer not in the manual?
Audio Section| max power output (4Ω) 5-channel mode | 80W X 4 + 240W X 1 |
|---|---|
| max power output (4Ω) 4-channel mode | 80W X 2 + 240W X 1 + 240W X 1 |
| max power output (4Ω) 3-channel mode | 80W X 2 + 240W X 1 + 240W X 1 |
| rated power output (4Ω) 5-channel mode | 40W X 4 + 120W X 1 |
| rated power output (4Ω) 4-channel mode | 40W X 2 + 120W X 1 + 120W X 1 |
| rated power output (4Ω) 3-channel mode | 120W X 2 + 120W X 1 |
| rated power output (2Ω) 5-channel mode | 60W X 4 + 150W X 1 |
| frequency response | 5Hz ~ 50kHz |
| signal to noise ratio | 100dB |
| sensitivity (max) | 0.2V (Rated Output) |
| sensitivity (min) | 5.0V (Rated Output) |
| input impedance | 10kΩ |
| high-pass filter (A, B channel) | 80Hz, 150Hz (12dB/oct.) |
| low-pass filter (SUB channel) | 50Hz ~ 200Hz (18dB/oct.) |
| infrasonic filter (SUB channel) | 15Hz (18dB/oct.) |
General| operating voltage | 14.4V (11V ~ 16V allowable) |
|---|---|
| current consumption (rated power) | 48A |
| dimensions (W x H x D) | 290 x 60 x 320 mm (11-7/16 x 2-3/8 x 12-5/8 inch) |
| weight | 5.42kg |
To Next Page
