Need help?Do you have a question about the Kenwood KAC-Q62 and is the answer not in the manual?
Critical warnings and precautions for safe operation and installation.
Explains frequency band division using coils/capacitors for Tri-mode.
Step-by-step guide for installing the unit in a vehicle.
Instructions and precautions for physically mounting and locating the unit.
Helps diagnose and resolve common operating problems.
Audio Section| rated power output (4 Ω) | 40W X 2(20Hz ~20 kHz, less than 0.08 % THD) |
|---|---|
| rated power output (2 Ω) | 55 W X 2( 1kHz, 0.8 % THD) |
| frequency response | 6 Hz~65 kHz (-3dB) |
| signal to noise ratio | 100 dB |
| sensitivity (MAX) | 0.15 V (rated output) |
| sensitivity (MIN) | 3.0 V (rated output) |
| input impedance | 10 kΩ |
| damping factor (100 Hz) | More than 100 |
Equalizer Section| equalizer center frequency | 50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz |
|---|---|
| frequency range | -10~+10 dB |
General| operating voltage | 14.4 V (11-16 V allowable) |
|---|---|
| current consumption | 16 A (1 kHz, 10%) |
| dimensions (W x H x D) | 220 X 48 X 200 mm, 8-11/16 X 1-7/8 X 7-7/8 in. |
| weight | 2.1 kg (4.7 lb) |
To Next Page
