W
William ReedSep 8, 2025
What does “CONNECT NG” mean on Kenwood KDC-348U Car Receiver?
- GgreenemirandaSep 8, 2025
If “CONNECT NG” appears on your Kenwood Car Receiver, the unit cannot be connected to the device.
To Next PageTo Next PageWhat does “CONNECT NG” mean on Kenwood KDC-348U Car Receiver?
If “CONNECT NG” appears on your Kenwood Car Receiver, the unit cannot be connected to the device.
Why is the radio reception poor on my Kenwood KDC-348U?
To improve poor radio reception or static noise on your Kenwood Car Receiver, ensure the antenna is firmly connected. Also, pull the antenna out all the way to maximize reception.
What to do if “PROTECT” appears on my Kenwood KDC-348U?
If “PROTECT” appears on your Kenwood Car Receiver and no operations can be performed, ensure the terminals of the speaker leads are properly covered with insulating tape, and then reset the unit. If the issue persists, it may require professional attention.
Why is the disc sound interrupted on my Kenwood KDC-348U Car Receiver?
If the disc sound is sometimes interrupted on your Kenwood Car Receiver, stop playback while driving on rough roads. You can also try changing the disc or checking the cords and connections.
What does “UNKNOWN” mean on Kenwood KDC-348U Car Receiver?
If “UNKNOWN” appears on your Kenwood Car Receiver, the Bluetooth device cannot be detected.
What does “NO VOICE” mean on Kenwood KDC-348U Car Receiver?
If “NO VOICE” appears on your Kenwood Car Receiver, there is no call.
What does “COPY PRO” mean on Kenwood KDC-348U Car Receiver?
If “COPY PRO” appears on your Kenwood Car Receiver, it indicates that a copy-protected file is being played.
Why is Bluetooth audio discontinuous on my Kenwood KDC-348U Car Receiver?
If the sound from the Bluetooth audio player is discontinuous on your Kenwood Car Receiver, it may be due to another Bluetooth device affecting the communication. Turn off other Bluetooth devices, or note that downloading the phone book or SMS may disconnect the sound.
What does “HF ERROR 07” mean on Kenwood KDC-348U?
If “HF ERROR 07” appears on your Kenwood Car Receiver, turn off the power and on again. If the message still appears, press the reset button on the control unit.
What does “NO DEVICE” mean on Kenwood Car Receiver?
If “NO DEVICE” appears on your Kenwood Car Receiver, connect a USB device and change the source to USB again.
General| Model | KDC-348U |
|---|---|
| Brand | Kenwood |
| Category | Car Receiver |
| Channels | 4 |
| Tuner | AM/FM |
| RDS | Yes |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| USB Input | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| Button Illumination | Red |
| Preout Voltage | 2.5V |
| Bluetooth | No |
| Detachable Face | Yes |
| Remote Control | Yes |
| Max Power Output | 50W x 4 |
| RMS Power Output | 22 Watts x 4 Channels |
| Preset Stations | 24 (18 FM/6 AM) |
