To Next PageTo Next PageWhat to do if “PROTECT” appears on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “PROTECT” and you can't do anything, ensure the speaker lead terminals are properly covered with insulating tape. Then, reset the unit. If the issue persists, seek assistance from your nearest service center.
How to fix Kenwood Car Receiver when no sound?
If your Kenwood Car Receiver is not producing sound, make sure the volume is at an audible level. Also, inspect the cords and connections to ensure they are properly connected.
What does “ERROR 99” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “ERROR 99”, this indicates a malfunction. Try pressing the reset button on the unit. If the error persists, it is recommended to consult your nearest service center.
What to do if Kenwood Car Receiver says “NO DISC”?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
How to fix “USB ERROR” on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “USB ERROR”, remove the USB device, turn the unit off, and then turn it back on. If the problem continues, try connecting a different USB device.
How to troubleshoot “iPod ERROR” on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. If that doesn't work, reset the iPod.
Why won't my Kenwood Car Receiver play CD-R/CD-RW discs?
If your Kenwood Car Receiver is having trouble playing CD-R/CD-RW discs or skipping tracks, insert a finalized CD-R/CD-RW. Finalize it with the component used for recording.
Why is Kenwood Car Receiver “READING” flashing?
If your Kenwood Car Receiver is flashing “READING”, it means a longer readout time is required. Avoid using too many hierarchies and folders.
What does “NA FILE” mean on Kenwood Car Receiver display?
If your Kenwood Car Receiver displays “NA FILE”, the unit is playing an unsupported audio file.
How to fix “TOC ERROR” on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “TOC ERROR”, the CD might be dirty, upside-down, or scratched. Try using another disc instead.
General| Power Output | 50W x 4 |
|---|---|
| RMS Power Output | 22W x 4 |
| Tuner | AM/FM |
| CD Playback | Yes |
| USB Input | Yes |
| Bluetooth | No |
| Preout Voltage | 2.5V |
| AUX Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| RDS | Yes |
| Display Type | LCD |
| Button Illumination | Red |
| Detachable Face | Yes |
| Remote Control | No |
| Channels | 4 |
| Equalizer | Yes |
How to clean the unit's exterior panel using a dry cloth.
How to clean the unit's connector carefully with a cotton swab.
Precautions and instructions for handling audio discs.
Step-by-step guide for attaching and detaching the faceplate.
Procedure to reset the unit to factory settings.
Instructions for preparing the remote controller for first-time use.
How to turn off the display demonstration mode.
How to turn the demonstration mode on or off.
How to adjust settings while listening to the radio.
How to tune directly to a specific radio frequency.
Steps to start playback of an audio disc.
How to properly connect a USB storage device.
How to properly connect an Apple iPod.
How to select repeat play modes for audio, MP3, WMA, and iPod.
How to select random play modes for audio, MP3, WMA, and iPod.
How to search and select folders, tracks, or files.
How to search for music by track number.
How to search for songs on an iPod by alphabet.
How to switch between iPod and unit control modes.
How to adjust skip search settings for iPod playback.
How to search for and select Pandora internet radio stations.
How to adjust various audio control settings.
Common issues encountered with the unit and their solutions.
Step-by-step guide for installing the unit.
Important warnings and cautions for safe installation.
How to install the unit without using the mounting sleeve.
Steps to safely remove the unit from the vehicle.
