J
John NelsonAug 29, 2025
What does “NO DEVICE” mean on my Kenwood KDC-BT520U?
- JjaredporterAug 29, 2025
Connect a USB device, and change the source to USB again.
To Next PageTo Next PageWhat does “NO DEVICE” mean on my Kenwood KDC-BT520U?
Connect a USB device, and change the source to USB again.
What to do if my Kenwood KDC-BT520U displays “MISWIRING CHECK WIRING THEN PWR ON”?
Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.
Why does my Kenwood KDC-BT520U Car Stereo System say “PROTECTING SEND SERVICE”?
The unit needs to be sent to the nearest service center.
Why is voice calling not working on my Kenwood Car Stereo System?
Use voice calling method in a more quiet environment. Also, reduce the distance from the microphone when you speak the name, and make sure the same voice as the registered voice tag is used.
How to fix echo during phone calls on Kenwood Car Stereo System?
Adjust the microphone unit’s position. You may also want to check the [ECHO CANCEL] setting.
Why is there no sound from my Kenwood Car Stereo System?
Make sure the volume is at an audible level and check the cords and connections.
General| Display type | LCD |
|---|---|
| Built-in display | Yes |
| Display technology | VA |
| Illumination color | Red |
| DIN size | 1 DIN |
| Impedance | 8 Ω |
| Clock mode | 24h |
| Output power | 88 W |
| RDS features | PTY, RT |
| Product color | Black |
| Volume control | Rotary |
| Frequency range | 20 - 20000 Hz |
| Disc types supported | CD-R, CD-RW |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 50 W |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 24 |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| USB version | 2.0 |
| Bluetooth version | 3.0+HS |
| USB port position | Front |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| USB ports quantity | 1 |
| Wireless range | 10 m |
| File format system | FAT 12/16/32 |
| Disc playback modes | Random, Repeat track |
| Antenna connector type | UKW/AM |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 1300 g |
|---|---|
| Dimensions (WxDxH) | 182 x 158 x 53 mm |
Key advice for proper use and safety warnings.
Critical safety notice regarding distracted driving and battery hazards.
Important precautions for safe operation and speaker protection.
Initial setup for language selection and disabling the demo mode.
Instructions for setting the current time and date.
Methods for finding radio stations using auto or manual tuning.
Navigating and selecting audio files from folders or lists.
Steps to connect your device and begin Pandora playback.
Steps to connect your device and begin Spotify playback.
Overview of supported Bluetooth profiles and codecs.
Step-by-step guide for initial Bluetooth device pairing.
Managing incoming and ongoing phone calls.
Initiating calls and managing phonebook, history, and voice commands.
Connecting and switching between multiple Bluetooth audio devices.
Streaming audio and using remote apps via Bluetooth.
Main section for adjusting sound parameters like EQ and subwoofer.
Adjusting audio signals for speaker crossovers.
Adjusting speaker delays for optimal sound staging.
Detailed instructions for in-dash installation.
Wiring diagram and color codes for connecting the unit.
Wiring diagram and color codes for KDC-320UIM model.
