J
Jennifer MccallSep 9, 2025
What does “NO NUMBER” mean on Kenwood KDC-DAB4551U Car Receiver?
- MMelissa FloresSep 9, 2025
If the Kenwood Car Receiver displays “NO NUMBER”, check caller ID settings and ensure a valid phone number is available.
What does “NO NUMBER” mean on Kenwood KDC-DAB4551U Car Receiver?
If the Kenwood Car Receiver displays “NO NUMBER”, check caller ID settings and ensure a valid phone number is available.
What does “USB ERROR” mean on Kenwood KDC-DAB4551U?
If your Kenwood Car Receiver displays “USB ERROR”, try removing the USB device, turning the unit off, and then turning it back on. If the same message appears, try connecting a different USB device.
What does “DEVICE FULL” mean on Kenwood KDC-DAB4551U Car Receiver?
If the Kenwood Car Receiver displays “DEVICE FULL”, it means that 5 Bluetooth devices have already been registered, and no more can be added.
Why does “READING” keep flashing on Kenwood Car Receiver?
If “READING” keeps flashing on your Kenwood Car Receiver, it indicates that a longer readout time is required. Avoid using too many hierarchies and folders.
What does “NO DATA” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO DATA”, check the outgoing, incoming, and missed call settings, as well as ensuring the phone book is populated.
What does “TOO LONG” mean on Kenwood Car Receiver?
If the Kenwood Car Receiver displays “TOO LONG”, the word or utterance is too long to be recognized.
Why is voice recognition not working on Kenwood KDC-DAB4551U Car Receiver?
If you are having trouble with voice recognition on your Kenwood Car Receiver, close the vehicle windows to reduce noise. Speak into the microphone more loudly and naturally. Also, ensure that the person uttering the voice tag is the one who registered it.
What does “HF DISCONCT” mean on Kenwood KDC-DAB4551U?
If the Kenwood Car Receiver displays “HF DISCONCT”, it means the unit cannot communicate with the cell-phone.
Why does song count differ between Kenwood KDC-DAB4551U and iPod?
If the number of songs in the “SONGS” category of your Kenwood Car Receiver differs from that of your iPod, check for podcast files in your iPod, as this unit does not support the playback of podcast files.
What does “NA DEVICE” mean on Kenwood KDC-DAB4551U?
If your Kenwood Car Receiver displays “NA DEVICE”, connect a supported USB device and check the connections.
| Type | Car Receiver |
|---|---|
| Model | KDC-DAB4551U |
| Brand | Kenwood |
| DAB Tuner | Yes |
| Preset Stations | 24 |
| USB Input | Yes |
| AUX Input | Yes |
| Bluetooth | Yes |
| Max Power Output | 50 W x 4 |
| Pre-out Voltage | 2V |
| Display Type | LCD |
| RDS | Yes |
| USB Port | Yes |
| DAB/DAB+ | Yes |
| AM/FM Tuner | Yes |
| Remote Control | Optional |
| Tuner Bands | AM, FM |
| Playback Media | USB |
| Media Playback | MP3, WMA, AAC |
| Steering Wheel Control | Yes |
| Equalizer | 13-Band Graphic Equalizer |
| Output Power | 22W RMS x 4 |
Loading...