L
Lori AdamsSep 9, 2025
What does it mean when my Kenwood Car Receiver displays “CANNOT SAVE”?
- JjuliejohnsonSep 9, 2025
If your Kenwood Car Receiver displays “CANNOT SAVE”, it indicates that adding to the favorite category has failed.
To Next PageTo Next PageWhat does it mean when my Kenwood Car Receiver displays “CANNOT SAVE”?
If your Kenwood Car Receiver displays “CANNOT SAVE”, it indicates that adding to the favorite category has failed.
Why is the radio reception so poor on my Kenwood Car Receiver?
If you're experiencing poor radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected. Also, try pulling the antenna out completely to improve the signal.
What to do if my Kenwood KDC-X399 Car Receiver isn't detecting Bluetooth devices?
If your Kenwood Car Receiver isn't detecting any Bluetooth devices, try searching for devices from the Bluetooth device again. If that doesn't work, reset the unit.
Why can't I pair my device with my Kenwood Car Receiver via Bluetooth?
If you're having trouble pairing your device with your Kenwood Car Receiver via Bluetooth, make sure you've entered the same PIN code on both devices. If the problem persists, delete the pairing information from both the unit and your Bluetooth device, and then try pairing them again.
What should I do if my Kenwood Car Receiver shows “DISCONNECTED”?
If your Kenwood Car Receiver displays “DISCONNECTED”, check the connection to the device.
What does “NO CONTENT” mean on my Kenwood KDC-X399 during TuneScan?
If your Kenwood Car Receiver displays “NO CONTENT”, it means there is insufficient content to start TuneScan.
What does “TOC ERROR” mean on my Kenwood KDC-X399 Car Receiver?
If your Kenwood Car Receiver shows “TOC ERROR”, make sure the disc is clean and inserted properly.
What to do when Kenwood Car Receiver shows “PLEASE EJECT”?
If your Kenwood Car Receiver displays “PLEASE EJECT”, reset the unit. If this does not solve the problem, consult your nearest service center.
What does “NA FILE” mean on my Kenwood KDC-X399 Car Receiver?
If your Kenwood Car Receiver shows “NA FILE”, ensure that the disc contains supported audio files.
What does “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON” mean on my Kenwood KDC-X399 Car Receiver?
If you see the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON” on your Kenwood Car Receiver, turn the power off. Then, check to ensure the terminals of the speaker wires are properly insulated before turning the power back on.
General| Power Output | 50W x 4 |
|---|---|
| RMS Power Output | 22W x 4 |
| Tuner | AM/FM |
| Bluetooth | Yes |
| USB Port | Yes |
| Display Type | LCD |
| Compatible Formats | MP3, WMA, AAC |
| AUX Input | Yes |
| CD Player | Yes |
| Remote Control | Yes |
| Preset EQ | Yes |
| Subwoofer Output | Yes |
| Steering Wheel Control Ready | Yes |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
Identifies product models and provides space for recording serial and model numbers for service.
Important safety advice regarding radiation exposure, operation, and general user precautions.
FCC warnings, disposal information, and California-specific handling of batteries.
Notices regarding Industry Canada compliance and radio frequency exposure limits.
Critical warnings for safe driving, unit maintenance, and disc handling.
Overview of faceplate controls, remote operation, and initial setup procedures.
Procedures for selecting the tuner, searching for stations, and using Direct Access Tuning.
Settings for auto memory, mono sound, regional tuning, AF, TI, and program type search.
Playing music from CDs, USB, iPods, Android; managing files and playback modes.
Connecting and using Pandora and iHeartRadio for music streaming and station management.
Setup, activation, channel selection, and using SmartFavorites/TuneScan for SiriusXM.
Pairing devices, call handling, phonebook access, and Bluetooth settings.
Streaming audio and internet radio services (Pandora, iHeartRadio) over Bluetooth.
Connecting auxiliary devices and adjusting audio settings like EQ and levels.
Adjusting color selection, dimmer, brightness, and text scroll options for the display.
Solutions for general, radio, media playback, and Bluetooth related problems.
Detailed technical data for tuner, CD player, connectivity, and audio components.
Steps for installing the unit, including wiring diagrams and part identification.
Details on warranty coverage, exclusions, and authorized service centers.
