What to do if my Kenwood Car Receiver sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try these solutions: First, adjust the volume to make sure it's at an audible level. Next, inspect the cords and connections to ensure they are properly connected. Finally, clean the connectors to remove any dirt or debris that might be interfering with the sound.
What to do if Bluetooth pairing cannot be made on Kenwood Car Receiver?
If you're having trouble pairing a Bluetooth device with your Kenwood Car Receiver: * Ensure you've entered the same PIN code on both devices. * Try deleting the pairing information from both the receiver and the Bluetooth device, and then attempt the pairing process again.
What to do if setting/deleting the remote control ID is unsuccessful on Kenwood Car Receiver?
If setting or deleting the remote control ID is unsuccessful and you see “SET ERROR” or “DEL ERROR” on your Kenwood Car Receiver, turn the power off, then turn it back on, and try the operation again.
Why does my Kenwood Car Receiver say 'MISWIRING CHECK WIRING THEN PWR ON'?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Then, check to ensure the terminals of the speaker wires are properly insulated. Turn the power back on.
What does “CHECK ANTENNA” mean on my Kenwood Car Receiver and how to fix it?
If your Kenwood Car Receiver displays “CHECK ANTENNA”, it means you should check that the antenna and its connection are in good condition.
What to do if my Kenwood Car Receiver disc cannot be ejected?
If the disc cannot be ejected from your Kenwood Car Receiver, press and hold the M button to forcibly eject the disc, being careful not to drop it. If this does not solve the problem, reset the unit.
Why does my Kenwood Car Receiver say “NO SIGNAL”?
If your Kenwood Car Receiver displays “NO SIGNAL”, make sure the antenna is mounted outside the vehicle.
What does “NO MUSIC” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
How to fix echo or noise during a phone conversation on my Kenwood Car Receiver?
If you experience echo or noise during phone conversations using your Kenwood Car Receiver, try the following: 1. Adjust the microphone unit’s position. 2. Check the [ECHO CANCEL] setting.
What does “USB HUB IS NOT SUPPORTED” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “USB HUB IS NOT SUPPORTED”, it means that the unit cannot support a USB device connected via a USB hub.
Essential information for proper product operation and safety.
Description of the unit's faceplate controls and indicators.
Guide to selecting display language and disabling the demonstration mode.
Instructions for setting the unit's internal clock and date.
Steps to find and tune into radio stations using manual or auto search.
Configuration options for tuner settings, PTY search, and time synchronization.
Controls for playback, track selection, repeat, and random modes for media.
Managing control modes, selecting music drives, and choosing files/folders.
Instructions for connecting and playing audio from an external device via AUX.
Guide to preparing, connecting, and starting Pandora streaming.
Guide to preparing, connecting, and starting Spotify streaming.
Connecting the tuner, checking Radio ID, and activating the subscription.
Steps for selecting channels, manual tuning, and direct access tuning.
First-time pairing, auto-pairing, and managing connected Bluetooth devices.
Receiving, answering, rejecting, and ending calls during Bluetooth connection.
Adjusting subwoofer level and manual/preset equalizer settings.
Selecting speaker sizes, setting crossover frequencies, and adjusting levels.
Configuring color/brightness for zones and setting dimmer on/off times.
Connecting and assigning functions to steering wheel remote control keys.
Resolving common issues with sound, unit operation, and radio reception.
Solving playback issues with CD, USB, iPod, Android, and streaming services.
Resolving SiriusXM channel errors and Bluetooth connectivity or sound problems.
Information on supported audio file formats, disc types, and USB file systems.
Details on compatibility with various Apple and Android devices, and Bluetooth versions.
Important warnings and cautions regarding safe wiring and mounting procedures.
Diagram illustrating the connections for power, speakers, and optional accessories.
Technical details for FM/AM reception, CD playback, and file decoding.
Technical details for USB connectivity and Bluetooth profiles/versions.
Specifications for auxiliary input, tone controls, and output power.
General| DIN Size | Single DIN |
|---|---|
| Power Output | 50 W x 4 |
| RMS Power Output | 22 W x 4 |
| Tuner Type | AM/FM |
| Bluetooth | Yes |
| USB Port | Yes |
| Display Type | LCD |
| Preamp Outputs | 3 |
| RDS | Yes |
| Faceplate Security | Detachable |
| Subwoofer Preamp RCA Output | Yes |
| Display Color | White |
| EQ Bands | 13 |
| SIRIUS or XM Radio | No |
| USB Input | Yes |
| AUX Input | Yes |
| Memory Card Slot | No |
| Android Compatibility | Yes |
| Apple Compatibility | Yes |
| CD Player | Yes |
| Remote Control | Yes |
| Detachable Faceplate | Yes |
| Steering Wheel Control Compatible | Yes |
| Compatible Formats | MP3, WMA, AAC |
| Playback | USB |
| Audio Playback | MP3, WMA |
| Button Color | Variable color |
To Next Page
