Need help?Do you have a question about the Kenwood KGC-9044 and is the answer not in the manual?
Equalizer Specifications| equalizer centre frequencies | 60 Hz, 120 Hz, 250 Hz, 380 Hz, 500 Hz, 750 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz |
|---|---|
| equalizer range | -10 ~ +10 dB |
| subwoofer cut-off frequency | 50 Hz, 80 Hz, 120 Hz |
| subwoofer output gain | -80 ~ +10 dB |
| subwoofer cut-off slope | 12 dB / oct. |
| hi-pass filter cut-off frequency | 40 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz, 150 Hz, 180 Hz, 220 Hz |
| hi-pass filter cut-off slope | 12 dB / oct. |
Audio Specifications| input impedance | 10 kΩ |
|---|---|
| sensitivity (max) | 1 V |
| sensitivity (min) | 4 V |
| output level/load | 4 V / 600 Ω |
| signal to noise ratio | 88 dB |
| t.h.d | 0.01 % |
| frequency response | 10 Hz ~ 40 kHz |
| gain | -13.4 dB ~ -25.2 dB |
General Specifications| operating voltage | 14.4 V (11 – 16 V allowable) |
|---|---|
| current consumption | 0.3 A |
| installation size | 182 × 50 × 145 mm |
| weight | 0.9 kg |
Key safety instructions to prevent injury, fire, and machine damage during operation and handling.
Guidelines for cleaning the unit and faceplate terminals to maintain performance and appearance.
Identifies and explains the function of various buttons, indicators, and displays on the unit's front panel.
Explains how to select and use preset equalizer curves for different music genres and loudness levels.
Details how to manually adjust sound levels across 11 frequencies to personalize audio preferences.
Guides on storing and recalling custom equalizer curves in memory for quick access.
Details how to navigate the menu system to adjust various operational settings like fader, filters, and display contrast.
Explains how to switch between various spectrum analyzer display modes for visual audio feedback.
Describes how to activate and cancel the demonstration mode to showcase unit features.
Guides on adjusting input sensitivity to match the connected unit's pre-out level for optimal sound quality.
Explains the automatic dimmer function that adjusts display brightness based on car light status.
Step-by-step instructions for safely detaching the unit's faceplate to prevent theft.
Guides on correctly reattaching the faceplate to the unit for normal operation.
Illustrates and lists the items included with the unit, emphasizing the use of provided accessories.
Provides a detailed sequence of steps for safely installing the unit into a vehicle.
Details the electrical connections required for installing the unit, including power, speakers, and amplifier.
Explains how to physically mount the unit, including using mounting sleeves and securing it in the dashboard.
Step-by-step instructions for safely removing the unit and its hard rubber frame from the car dashboard.
Provides a comprehensive list of common problems, their possible causes, and recommended solutions for troubleshooting.
Lists specifications related to the equalizer, including frequencies, range, and cut-off slopes.
Outlines audio-specific technical parameters such as input impedance, sensitivity, output level, and frequency response.
Provides general technical specifications for the unit, including operating voltage, current consumption, installation size, and weight.
To Next Page
