Kenwood KM002 User Manual

Please pick one of the following:
DISMANTLING AND RE-ASSEMBLING OF SOVEREIGN - KM001/002/003 AND
KM005/006/007
TOP COVER MOTOR
LATCH ASSEMBLY
PEDESTAL
GEARBOX SPEED CONTROL KNOB
TOP COVER
1. REMOVE ALL COVERS
2. REMOVE 4 SCREWS AND SPIGOTS
(NO.2 POZIDRIVE)
3. REMOVE SPIGOT PLATE
(A SMALL FLAT BLADED SCREWDRIVER
INSERTED BETWEEN THE PLATE AND THE
CASTING CAN BE USED TO EASE OFF THE
PLATE AROUND THE HIGH SPEED SPIGOT)
Page 1 of 11Spares - KM001/002/003/502/005/006/007/506 Disassembly & re-assembly instructio
...
30/04/2009http://www.kenwoodservice.co.uk/product-files-kar/soverei
g
n-tech2.htm

Kenwood KM002 Specifications

General

Brand	Kenwood
Model	KM002
Category	Food Processor
Language	English

Summary

Top Cover Disassembly

Lift Off Top Cover

Lift the top cover from the high-speed outlet end.

Pedestal Disassembly

Invert and Remove Box Components

Head Release and Fastener Removal

Disconnect and Remove Modules

Lift quadrant cover, disconnect connectors, remove speed control module.

Motor Disassembly

Initial Motor Access

Remove Belt and Panel Components

Motor Removal and Reassembly Notes

Remove motor, reassemble motor screws first. Notes on fan/pulley replacement.

Brush Assembly Removal

Gearbox Disassembly

Gearbox Pulley Removal Methods

Remove large pulley using a stall plug or mincer.

Latch Assembly Disassembly

Remove Latch Assembly Components

Unhook latch springs, remove C-clip and latch bar.

Speed Control Knob Disassembly

Remove Speed Control Module and Cover

Remove Control Board

Lift out control board and insulation sheet, remove single screw.