To Next Page
M
Monica MorganSep 23, 2025
What does “N/A VOICE TAG” mean on my Kenwood Other?
- JjgardnerSep 23, 2025
If your Kenwood Other displays “N/A VOICE TAG”, make sure the same voice as the registered voice tag is used.
What does “N/A VOICE TAG” mean on my Kenwood Other?
If your Kenwood Other displays “N/A VOICE TAG”, make sure the same voice as the registered voice tag is used.
Why is the phone sound quality poor on my Kenwood Other?
If the phone sound quality is poor when using your Kenwood Other, try reducing the distance between the unit and the Bluetooth device. You may also need to move your car to a location with better signal reception.
How to improve radio reception on Kenwood Other?
If the radio reception is poor on your Kenwood Other, make sure the antenna is firmly connected and pull the antenna out all the way.
What to do if my Kenwood Other unit does not work at all?
If your Kenwood Other unit isn't working at all, try resetting it.
How to fix echo or noise on Kenwood Other?
If you are experiencing echo or noise with your Kenwood Other, try adjusting the microphone unit’s position. Also, check the [ECHO CANCEL] setting.
Why does “READING” keep flashing on my Kenwood Other?
If your Kenwood Other displays “READING” keeps flashing, do not use too many hierarchical levels or folders.
Why are correct characters not displayed on my Kenwood Other?
If the correct characters are not displayed on your Kenwood Other (e.g. album name), it is because this unit can only display uppercase letters, numbers, and a limited number of symbols.
What does “HF ERROR XX” mean on my Kenwood Other?
If your Kenwood Other displays “HF ERROR XX”, reset the unit and try the operation again.
What does “NA DEVICE” mean on my Kenwood Other?
If your Kenwood Other displays “NA DEVICE”, connect a supported USB device and check the connections.
What does “NA FILE” mean on my Kenwood Other?
If your Kenwood Other displays “NA FILE”, make sure the media contains supported audio files.
Important safety warnings and cautions for operating the unit while driving.
How to connect USB and iPod/iPhone devices and start playback.
Details on controlling playback, including pause, skip, repeat, and random modes.
Steps for connecting and pairing Bluetooth devices like phones and audio players.
How to receive, reject, end calls, and manage call modes and volume.
Adjusting preset EQs, bass boost, loudness, and subwoofer settings.
Solutions for common problems like no sound, unit not responding, or display errors.
Resolving issues related to Bluetooth device detection, pairing, audio playback, and voice calls.
Safety warnings, cautions, and the basic steps for installing the unit.
Specific wiring instructions for ISO connectors on certain Volkswagen, Audi, and Opel vehicles.
Detailed pinout and connection diagram for power, speakers, and accessory wires.
Specific wiring diagram for the KMR-M308BTE model.
General| Power Output | 50 watts x 4 channels |
|---|---|
| Bluetooth | Yes |
| USB Port | Front |
| Tuner | AM/FM |
| Preamp Outputs | 2-channel |
| Equalizer | 13-band graphic EQ |
| DIN Size | Single DIN |
| Detachable Face | Yes |
| RMS Power Output | 22 watts x 4 channels |
| Peak Output | 50 watts x 4 channels |
| RMS Power Output (CTA-2006) | 22 watts x 4 channels |
| Sub Preamp Outputs | Yes |
| AUX Input | Front |
| iPod Compatibility | Yes |
| Android Compatibility | Yes |
| Pandora Control | Yes |
| SiriusXM Ready | No |
| HD Radio | No |
| Radio Tuner | AM/FM |
| Steering Wheel Control Compatible | Yes |
| Audio Formats Supported | MP3, WMA, WAV, FLAC |
| Display Type | LCD |
| EQ | 13-band |
