ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TUNER SETTING
PRESET TYPE
NORMAL
:Memorizes one station for each preset button in each band (FM1/
FM2/FM3/AM).;
MIX
:Memorizes one station or SiriusXM channel for each preset
button, regardless of the selected band or SiriusXM channel.
SYSTEM
KEY BEEP
ON
:Activates the keypress tone.;
OFF
:Deactivates.
SOURCE SELECT
PANDORA SRC
(Except for )
ON
:Enables PANDORA FRONT/PANDORA REAR/PANDORA in source selection.;
OFF
:Disables.
( 12)
IHEART SRC
(Except for )
ON
:Enables IHEARTRADIO-F/IHEARTRADIO-R/IHEARTRADIO in source selection.;
OFF
:Disables.
( 13)
SPOTIFY SRC
ON
:Enables SPOTIFY FRONT/SPOTIFY REAR/SPOTIFY in source selection.;
OFF
:Disables.
( 14)
BUILT-IN AUX
ON
:Enables AUX in source selection.;
OFF
:Disables.
( 11)
F/W UPDATE
UPDATE SYSTEM/UPDATE HD
(for )
F/W UP xxxx/
F/W UP Vxx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
FACTORY RESET YES
:Resets the settings to default (except the stored station).;
NO
:Cancels.
CLOCK
CLOCK DISPLAY
(Except for )
ON
:The clock time is shown on the display even when the unit is turned off.;
OFF
:Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and music information if
applicable.
By default,
[ENGLISH]
is selected.
ESPANOL
Register the marine remote ID
(for )
Applicable only when you connect Kenwood Marine Remote
Control unit (KCA-RC55MR, optional accessory) to this unit.
• For connection,
38, Connecting external components
.
• Refer also to the supplied instruction manual of the Kenwood
Marine Remote Control unit for more information.
Preparation:
Press
repeatedly to enter STANDBY, then press the volume
knob to enter
[FUNCTION].
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM]
[REM SETTING]
[REMOTE ID SET]
Remote control ID list is displayed.
•
[YES]
indicates that this ID is already registered.
•
[NO]
indicates that this ID is available.
2 Turn the volume knob to select an available ID
[REM ID1]
/
[REM ID2]
/
[REM ID3]
, then press the knob
.
“REGISTERING” appears on the display window.
To register, on the Kenwood Marine Remote Control unit:
• Press ENTER to register as
[REM ID1]
.
• Press SRC to register as
[REM ID2]
.
• Press DISP to register as
[REM ID3]
.
Once the ID is registered, “COMPLETED” appears.
To delete the registered ID
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM]
[REM SETTING]
[REMOTE ID DEL]
2 Turn the volume knob to select the ID to delete [
ID1 DELETE]
/
[
ID2 DELETE]
/[
ID3 DELETE]
, then press the knob.
3 Turn the volume knob to select
[YES]
to delete the selected
ID, and select
[NO]
to cancel.
• To exit, press and hold
.
• To return to the previous setting item, press
.
GETTING STARTED
JS_KWD_KMM_BT522HD_KN_EN_9.indd 5JS_KWD_KMM_BT522HD_KN_EN_9.indd 5 7/7/2017 11:24:50 AM7/7/2017 11:24:50 AM
To Next Page
Loading...
Need help?
General