To Next PageTo Next PageWhat to do if my Kenwood KMR-M322BT says 'NO DEVICE' or 'READING' keeps flashing?
If you see “NO DEVICE” or “READING” flashing, try these steps: first, switch off the developer options on your Android device. If that doesn't work, try reconnecting the Android device.
What does 'NA FILE' mean on my Kenwood KMR-M322BT?
If you see the message “NA FILE”, it means you should make sure the media you're using contains supported audio files.
Why is there no sound coming from my Kenwood Receiver?
If you can't hear any sound, first adjust the volume to the desired level. If that doesn't work, check the cords and connections to ensure they are properly connected.
What to do if my Kenwood Receiver says 'MISWIRING CHECK WIRING Turn the power off, then check to be sure the THEN PWR ON'?
If the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the THEN PWR ON” appears, turn off the power. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
How to fix Bluetooth pairing issues on my Kenwood KMR-M322BT?
If you're having trouble pairing a Bluetooth device, ensure that you've entered the same PIN code on both the Kenwood unit and the Bluetooth device. If the problem persists, delete the pairing information from both devices and try pairing them again.
Why is no Bluetooth device detected by my Kenwood KMR-M322BT?
If your Kenwood Receiver isn't detecting a Bluetooth device, try searching for the device again from the Bluetooth device itself. If that doesn't work, try resetting the unit.
What does 'CH LOCKED LOCK CODE?' mean on my Kenwood Receiver?
If your Kenwood Receiver displays “CH LOCKED LOCK CODE?”, you need to enter the correct pass code to unlock it.
What does 'ADD ERROR' mean on my Kenwood Receiver?
The message “ADD ERROR” indicates that creating a new station was unsuccessful.
What does 'THUMBS N/A' mean on my Kenwood KMR-M322BT?
The message “THUMBS N/A” means that registration of thumbs up/thumbs down is not allowed.
What does 'NO STATIONS' mean on my Kenwood Receiver?
The message “NO STATIONS” indicates that no stations were found.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| Tuner | AM/FM |
| Display Type | LCD |
| Compatible Formats | MP3, WMA, WAV, FLAC |
| Type | Digital Media Receiver |
| DIN Size | Single DIN |
| Faceplate Security | Detachable |
| USB Input | Yes |
| AUX Input | Yes |
| Button Illumination | Variable Color |
| Marine Use | Yes |
| SiriusXM Ready | No |
| Pandora Control | Yes |
| iHeartRadio Control | Yes |
| Spotify Control | Yes |
| Power Output | 50 Watts |
| RMS Power Output | 22 Watts |
| Peak Output | 50 Watts |
| RMS Power Output per Channel | 22W |
| Peak Power Output per Channel | 50W |
Steps for language, clock, date, and initial system settings.
Connecting and playing content from various devices via USB.
Connecting tuner, activating subscription, and basic tuning.
Keymodes, SmartFavorites, TuneStart, and TuneScan operations.
Steps for connecting and pairing phones and audio players.
Handling incoming calls, making calls, and using call history.
Common problems with sound, wiring, and radio reception.
Solutions for USB, iPod, Android, and streaming service issues.
Resolving Bluetooth pairing, call, and audio playback problems.
Guidelines for mounting the unit in the vehicle.
Explains color-coded wiring and component connections.
