Need help?Do you have a question about the Kenwood KR-300HT and is the answer not in the manual?
General| Tuning range | FM, MW |
|---|---|
| Power output | 20 watts per channel into 8Ω (stereo) |
| Frequency response | 20Hz to 20kHz |
| Total harmonic distortion | 0.08% |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Dimensions | 440 x 127 x 327mm |
| Weight | 7.5kg |
| Signal-to-Noise Ratio | 75dB (MM), 100dB (line) |
How to set the AC voltage selector switch on the rear panel for safe operation.
Essential warnings to prevent fire, electric shock, and other hazards during operation.
Guide to connecting various audio and video devices to the receiver.
Instructions for connecting front, center, surround, and subwoofer speakers.
Explanation of the receiver's display panel and its front panel controls.
Details on remote control keys, their functions, and battery installation.
Table mapping remote control keys to specific operations for KENWOOD components.
Steps to power on, select speaker outputs, and choose the audio input source.
How to adjust tone controls and balance the sound output between left and right speakers.
Steps for recording music sources and copying tapes between decks.
Steps for selecting tuner input, band, and using auto/manual tuning.
Procedure to reset the unit's microcomputer in case of malfunction.
Common symptoms, causes, and remedies for amplifier and tuner operational problems.
To Next Page
