Kenwood KR-795 User Manual

Ensures the unit is set to the correct voltage for the area before connecting to AC outlet.

Details on connecting AM and FM antennas (loop, indoor, outdoor).

Guides for connecting speakers, system control cords, and adaptor jacks.

Explanation of the switch for FM de-emphasis and channel spacing settings.

Detailed description and labeling of controls and indicators on the KR-795 front panel.

Detailed description and labeling of controls and indicators on the KR-595 front panel.

Instructions for loading batteries and operating the KR-795 via remote control.

Instructions for loading batteries and operating the KR-595 via remote control.

Step-by-step guide for powering on, selecting sources, adjusting volume, balance, and tone.

Instructions for temporarily muting sound and listening through headphones.

Procedure for recording audio onto a cassette tape.

Detailed steps for tuning stations and saving them into memory presets.

Methods for receiving a specific preset station or cycling through all presets.

Explanation of surround sound effects and recommended speaker layouts.

Step-by-step guide to adjust Dolby PRO LOGIC settings for optimal sound.

Procedure for activating and using Dolby PRO LOGIC surround sound.

Guide to using and adjusting the Dolby 3 STEREO mode for enhanced center image.

Method to reset the unit's microcomputer to resolve operational errors.

Common symptoms, causes, and remedies for remote control malfunctions.

Troubleshooting for reception problems and interference in the tuner section.

Solutions for no sound, speaker output problems, and hum noise.