Need help?Do you have a question about the Kenwood KR-7400 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuning Range | FM, MW |
| Power Output | 60 watts per channel into 8Ω (stereo) |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.1% |
| Damping Factor | 50 |
| Signal to Noise Ratio | 70dB (MM), 90dB (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Dimensions | 502 x 140 x 371mm |
| Weight | 15.2kg |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
Details the FM Radio Frequency stage, its components, and functionality.
Explains the FM Intermediate Frequency circuit, filters, and detection stages.
Details the current limiter and DC drift protection mechanisms.
Provides alignment procedures for FM tuner stages like IFT and Discriminator.
Details alignment procedures for AM tuner stages such as IFT and RF.
Covers bias adjustments for the audio amplifier stages.
To Next Page
