Need help?Do you have a question about the Kenwood KR-595 and is the answer not in the manual?
General| Weight | 10.2kg |
|---|---|
| Tuning range | FM, MW |
| Total Harmonic Distortion | 0.08% (20Hz-20kHz, 8 ohms) |
| Input Sensitivity | 150mV (line) |
| Dimensions | 435 x 130 x 340mm |
| Speaker load impedance | 4-16 ohms |
Enjoy Dolby Surround effect similar to movie theaters from video programs.
Provides active center channel for better, stable center image.
Ensures the unit is set to the correct voltage for operation.
Specific instructions for UK mains plug and fuse replacement.
Instructions for connecting the AM loop antenna for indoor use.
Guidance for connecting an outdoor wire antenna for better AM reception.
Instructions for connecting the supplied FM indoor antenna.
Recommendation for installing an exclusive FM outdoor antenna.
Procedure for connecting speaker cables to the unit.
Connecting system control cords for integrated operation.
Adjusting the FM de-emphasis and channel space settings.
Connecting external components like graphic equalizers.
Step-by-step guide to insert batteries into the remote control.
Instructions on how to use the remote control unit.
Step-by-step guide to insert batteries into the remote control.
Instructions on how to use the remote control unit.
Step-by-step guide for basic unit operation.
How to temporarily mute the audio output.
Instructions for using headphones with the unit.
Procedure for recording audio onto a cassette tape.
Guide to tuning and saving radio stations into memory.
How to select and listen to a previously stored radio station.
Sequential playback of all stored radio stations.
Instructions for selecting and playing video input sources.
Explanation of surround sound experience and setup.
Guidance on speaker placement for optimal surround sound.
Detailed steps for adjusting Dolby PRO LOGIC settings.
How to set and use the Dolby PRO LOGIC mode.
Steps to adjust center speaker volume and test tone.
How to play stereo software or Dolby surround programs.
Method to reset the unit's microcomputer for troubleshooting.
Troubleshooting common problems with the remote control.
Troubleshooting radio reception and interference problems.
Troubleshooting sound output problems and hum noise.
Guidelines for proper grounding of CATV system cables.
Information on potential radio frequency interference and user compliance.
To Next Page
