To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KR-694 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Power Output | 80 watts per channel into 8Ω (stereo) |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Signal-to-Noise Ratio | 80dB (MM), 100dB (line) |
Details for recording serial number and model information for warranty and service.
Guidance on carefully unpacking the audio stereo receiver and checking for damage.
A list of all accessories provided with the unit for initial setup and operation.
Instructions for selecting the correct AC voltage and critical safety warnings to prevent hazards.
Notice regarding radio frequency interference, compliance with FCC rules, and user responsibilities.
Explanation of Dolby Pro Logic and Dolby 3 Stereo surround sound technologies.
Diagrams and instructions for connecting various audio and video components to the receiver.
Explanation of how connected KENWOOD components can operate automatically via system control cords.
Details on connecting both indoor loop and outdoor antennas for AM reception.
Instructions for connecting indoor and outdoor antennas for FM reception.
Detailed explanation of the function of each button, knob, and display on the receiver's front panel.
Information about the standby mode, indicator light, and remote control power activation.
Explains the operation of various keys on the remote for controlling the receiver and other components.
Step-by-step instructions for inserting batteries into the remote control unit.
How to turn on the system and operate components using the remote control.
How to adjust bass and treble controls to modify the sound's tonal characteristics.
Guide for adjusting the left and right sound balance for optimal stereo imaging.
Explanation of the loudness feature for compensating low frequencies at low volumes.
Instructions on how to mute the audio output temporarily using the remote control.
How to activate line-straight playback for enhanced sound quality from sources like CD.
Steps to select a source and record music onto a cassette deck.
Instructions for copying audio from one tape deck to another.
How to record audio from CD or turntable synchronously with playback.
Guide for tuning in to broadcast stations using tuner input, band selection, and tuning methods.
Instructions for tuning to a station before storing it in memory.
Steps to store and recall preset radio stations using the memory function.
How to recall specific preset stations or cycle through all stored stations.
Steps for playing back videotapes using the VIDEO 1 input.
Instructions for connecting and recording video sources onto a video deck via VIDEO 2 input.
Explanation of Dolby Pro Logic mode for realistic surround sound effects with compatible software.
How Dolby 3 Stereo improves center channel positioning for a better acoustic image.
Steps to activate Dolby Pro Logic mode, select center modes, and adjust volume balance.
Guide on how to adjust the surround sound delay time and calculate proper settings.
Steps to activate Dolby 3 Stereo mode, select center modes, and adjust volume balance.
Common problems with the remote control and their solutions.
Troubleshooting steps for no sound or sound from only one speaker.
Solutions for radio stations not being received or experiencing interference.
Technical details for power output, distortion, input sensitivity, and tone controls.
Technical details for FM and AM tuner frequency range, sensitivity, and selectivity.
Details on power consumption, dimensions, and weight of the audio stereo receiver.
