To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KR-6030 and is the answer not in the manual?
Amplifier Section| power output | 80 watts per channel |
|---|---|
| total harmonic distortion | 0.1% at rated power into 8 ohms |
| intermodulation distortion | 0.1% at rated power into 8 ohms |
Power| power consumption | 600 W at full power |
|---|---|
| dynamic power output | 340 W |
| maximum input level for phono | 250 mV (RMS), T.H.D. 0.1% at 1, 000 Hz |
Weight and Dimensions| weight | 30.9 lbs (14.0 kg) |
|---|---|
| gross weight | 35.2 lbs (16.0 kg) |
| dimensions | W 18-29/32" (480 mm), H 5-7/8" (149 mm), D 15-15/16" (405 mm) |
Steps for removing the power supply unit and its components.
Guide for disassembling the power amplifier module.
Procedure for removing the front and rear panels.
Instructions for removing the tuner PC board assembly.
Instructions for meter and dial calibration lamp replacement.
Details on protection circuits and shock noise prevention.
Explanation of the ASO detection circuit functionality.
List of resistors used in the unit.
List of transistors, diodes, and ICs.
List of various capacitor types.
Procedures for FM tuning and alignment.
Procedures for AM tuning and alignment.
Technical details of the amplifier performance.
Technical details of the FM tuner performance.
Technical details of the AM tuner performance.
Power consumption, dimensions, and weight details.
