Need help?Do you have a question about the Kenwood KR-6400 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Frequency Response | 10Hz to 50kHz |
| Total Harmonic Distortion | 0.5% |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 70dB (MM), 90dB (line) |
| Speaker Impedance | 4Ω to 16Ω |
| Tuning Range | FM, MW |
| Output | 150mV (line) |
Guides on connecting speaker systems to terminals A, B, C and using the speaker switch.
Details on connecting FM (300Ω, 75Ω) and AM antennas for optimal reception.
Explains the function of meters, switches, and knobs on the front panel.
Details on volume, balance, tuning, tape monitor, filters, loudness, and mic jack.
Procedures for simultaneous recording and dubbing between two tape recorders.
Lists common problems during AM reception, their causes, and corrections.
Troubleshooting for issues during AM, FM, or record playback with causes and fixes.
Lists common problems during FM reception, their causes, and corrections.
Troubleshooting specific problems encountered during phono record playback.
To Next Page
