Need help?Do you have a question about the Kenwood KR-6170 and is the answer not in the manual?
General| Tuning Range | FM, MW |
|---|---|
| Total Harmonic Distortion | 0.3% |
| Frequency Response | 20Hz to 20kHz |
| Speaker Load Impedance | 4Ω to 16Ω |
| Damping Factor | 30 |
| Power Output | 70 watts per channel into 8Ω (stereo) |
| Inputs | Phono, Aux, Tape |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 70dB (MM) |
Procedures for aligning FM/AM tuners and adjusting SCA filter, MPX, and muting circuits.
Steps for testing, setting idling current, adjusting meters, and configuring input/output jacks.
Guidelines for speaker selector function and replacing printed circuit boards.
To Next Page
