To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KR-930 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuning Range | FM, MW |
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.03% |
| Damping Factor | 50 |
| Speaker Load Impedance | 4Ω to 16Ω |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 90 dB |
| Inputs | Phono, Aux, Tape |
Guides on selecting correct voltage and crucial safety precautions for safe operation.
Steps for carefully unpacking the receiver and checking for shipping damage.
Guidance on proper placement, ventilation, and handling safety precautions.
Instructions for cleaning the unit and responding to abnormal smells or smoke.
How to connect speaker systems A and B, including polarity and wire preparation.
Connecting tape decks to TAPE A and TAPE B, and instructions for playback and recording.
Details on connecting a second tape deck, turntable, and ensuring proper grounding.
Guidance on installing indoor and outdoor antennas for optimal FM and AM reception.
Information on using rear AC outlets and connecting an AM stereo adaptor.
Details on the power switch, frequency display, and signal strength indicators.
Explanation of tuning controls, memory functions, and speaker selection switches.
Information on volume control, loudness, headphone jack, and preset station buttons.
Detailed explanation of front panel controls for audio adjustment, tuning, and tape operations.
Configuration of rear panel switches for FM de-emphasis and channel space settings.
Step-by-step guide for automatically tuning in FM and AM broadcast stations.
Instructions for manually tuning into weaker FM or AM stations.
How to preset up to six AM and FM stations for quick access.
Using preset tuning and operating the turntable for playback.
Playing tapes from tape decks and monitoring recording progress.
Instructions for recording with one or two tape decks and dubbing tapes.
Diagnosing and resolving problems with no sound or sound from only one channel.
Addressing issues like no sound from PHONO or loud hum during playback.
Troubleshooting background buzz and howling noise at high volumes.
Detailed technical specifications for the audio section and IHF measurements.
Technical specifications for the FM and AM tuner sections, including sensitivity.
Overall power consumption, AC outlet details, physical dimensions, and weight.
