To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KR-A5060 and is the answer not in the manual?
General| Type | Stereo receiver |
|---|---|
| Input sensitivity (MM) | 2.5mV |
| Frequency Response | 10Hz to 50kHz |
| Total Harmonic Distortion | 0.08% |
| Signal-to-Noise Ratio | 95dB (line) |
| Tuning range | FM, MW |
| Speaker load impedance | 8 ohms |
Keys for tuning broadcast bands and recalling preset stations.
Selects the audio/video input sources for the receiver.
Monitors the source being recorded on Tape 2.
Adjusts the listening volume of the main unit.
Keys to operate TAPE A and TAPE B decks, including REC/ARM function.
Keys to select CD discs for playback.
Setting up the receiver for initial operation, including memory clearing.
Entering, canceling, and contents of the special test mode for diagnostics.
Details on the μ-com IC and its peripheral block diagram connections.
Diagram showing connections for the key matrix to the μ-com.
How destination, model, and specifications are set using the diode key matrix.
Overview of AMP and TUNER system functions and features.
Conditions for AMP/TUNER based on destination and model using diode switches.
Default states of AMP and TUNER systems upon initial power-on.
Procedures for entering, canceling, and operations during the main unit test mode.
Procedures for adjusting discriminator, VCO, distortion, and tuning level in the FM section.
Procedures for adjusting tuning level and idle current in the AM section.
Adjustments for idle current in the audio section.
Diagram showing how to connect test equipment for adjustment procedures.
Rated power, distortion, signal-to-noise, sensitivity, and tone control details.
Tuning range, sensitivity, distortion, S/N ratio, selectivity, and separation.
Tuning range, sensitivity, distortion, S/N ratio, and selectivity.
Power consumption, dimensions, weight, and AC outlet details.
