Do you have a question about the Kenwood KRC-855R and is the answer not in the manual?
frequency range | 87.5 MHz - 108.0 MHz |
---|---|
usable sensitivity | 0.7 µV/75 ohms |
quieting sensitivity | 1.6 µV/75 ohms |
frequency response | 30 Hz - 15 kHz |
signal to noise ratio | 70 dB (+400 kHz) |
stereo separation | 35 dB |
19 kHz carrier leakage | 65 dB |
frequency range | 531 kHz - 1611 kHz |
---|---|
usable sensitivity | 30 µV |
frequency range | 153 kHz - 281 kHz |
---|---|
usable sensitivity | 60 µV |
tape speed | 4.76 cm/sec |
---|---|
wow & flutter | 0.09 % WRMS |
fast winding time (C-60) | 100 sec |
frequency response (120 µs) | 30 Hz - 18 kHz (+4 dB, -6 dB) |
frequency response (70 µs) | 30 Hz - 20 kHz (+4 dB, -6 dB) |
stereo separation | (1 kHz) |
signal to noise ratio (Dolby B NR OFF) | Dolby B NR ON |
output power (1% THD, 1 kHz, 4 ohms) | 5W x 4 |
---|---|
tone action bass | 100 Hz +10 dB |
treble | 10 kHz +10 dB |
preout level / impedance | 1500 mV (Max.) / 180 ohms |
operating voltage | 14.4 V (11-16 V allowable) |
---|---|
current consumption | 7.5 A at rated power |
dimensions (W x H x D) | 188 x 58 x 176 mm |
installation size (W x H x D) | 182 x 53 x 154 mm |
weight | 1.75 kg |