Kenwood KRF-A4030 Instruction Manual

Compared to standard remote controls, the remote control supplied with this receiver has
several operation modes. These modes enable the remote control to control other audio
components. In order to effectively use the remote control it is important to read the
operating instructions and obtain a proper understanding of the remote control and how to
switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch
the operation modes may result in incorrect operations.
KRF-A4030
INSTRUCTION MANUAL
B60-4557-00 (EN)
AUDIO RECEIVER
About the supplied remote control (RC-R0708) . . .

Kenwood KRF-A4030 Specifications

Audio Specifications

Rated power output during STEREO operation (DIN)	105 W + 105 W
Rated power output during STEREO operation (IEC)	100 W + 100 W
Total harmonic distortion	0.02 %
Signal to noise ratio (PHONO MM)	75 dB
Signal to noise ratio (CD)	92 dB
Input sensitivity / impedance (PHONO MM)	2.5 mV / 27 kΩ
Input sensitivity / impedance (CD)	200 mV / 47 kΩ
Output level / impedance (TAPE REC)	200 mV / 2.2 kΩ
Output level / impedance (PRE OUT SUBWOOFER)	2 V / 2.2 kΩ
Tone control (BASS)	±9 dB (at 100 Hz)
Tone control (TREBLE)	±9 dB (at 10 kHz)

AM Tuner Specifications

Tuning frequency range	531 kHz ~ 1, 602 kHz
Usable sensitivity	16 µV / (600 µV/m)
Signal to noise ratio	50 dB

General Specifications

Power consumption	280 W
AC outlet (SWITCHED)	2 (total 150 W max.)
Dimensions (W x H x D)	440mm x 144mm x 389mm
Weight (Net)	8.0 kg

FM Tuner Specifications

Tuning frequency range (U.K. and Europe)	87.5 MHz ~ 108.0 MHz
Tuning frequency range (Russia)	65.0 MHz ~ 74.0 MHz
Usable sensitivity (MONO)	1.2 µV / 13.2 dBf
Usable sensitivity (STEREO)	45 µV / 44.2 dBf
Total harmonic distortion (MONO)	0.2%
Total harmonic distortion (STEREO)	0.8%
Signal to noise ratio (U.K. and Europe, MONO)	65 dB
Signal to noise ratio (U.K. and Europe, STEREO)	58 dB
Signal to noise ratio (Russia, MONO)	63 dB
Signal to noise ratio (Russia, STEREO)	58 dB
Stereo separation	36 dB
Selectivity	64 dB
Frequency response	+0.5 dB ~ –3.0 dB