To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V6010 and is the answer not in the manual?
General| Type | AV receiver |
|---|---|
| Channels | 5.1 |
| Power Output | 100 W (per channel) |
| Frequency Response | 10 Hz - 50 kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV (line) |
| Signal-to-Noise Ratio | 100 dB |
| Dimensions | 17.1 x 5.5 x 14.2 inches |
| Weight | 25.5 lbs |
| Output | Speaker terminals |
| Video Connections | Composite, S-Video |
| Input Sensitivity/Impedance | 47 kOhms |
| Digital Inputs | Coaxial, Optical |
Identifies controls, indicators, and displays on the front panel.
Lists and describes the connectors found on the rear panel.
Explains front panel display indicators and the standby indicator function.
Details power, input selection, volume, bass, treble, and sound mode controls.
Covers controls for tuner bands, speaker selection, and muting the audio.
Explains the functions of the RC-R0407 remote control.
Details the functions of the RC-R0507 and RC-R0607 remote controls.
Outlines the procedure for disassembling the unit and making ground connections.
Shows wiring connections for tuner, display, main amp, and power units.
Provides a high-level overview of the unit's signal paths and functional blocks.
Covers data backup, initial settings, and model-specific functional variations.
Explains tuner destination lists and test mode procedures.
Details microprocessor periphery, operation keys, and input level functions.
Provides a detailed description of each pin on the microprocessor.
Lists control functions for input, volume, surround modes, and speaker configurations.
Describes the procedure for adjusting FM and TV tuning parameters.
Illustrates how system components should be connected.
Shows component layouts for tuner, power supply, and main unit PC boards.
Displays layouts for main unit details and IC control boards.
Illustrates layouts for microprocessor periphery and tuner/SAP IC boards.
Presents the circuit diagrams for the FM front-end section.
Shows the circuit diagrams for the power amplifier stages.
Illustrates the circuit diagrams for signal processing integrated circuits.
Lists detailed information on semiconductor and IC components.
Displays the complete circuit diagram for the entire system.
Provides an exploded view showing how the unit is assembled.
Lists parts related to the unit's cabinet, panels, and indicators.
Lists parts for knobs, switches, and various connectors.
Lists components related to power supply, fuses, and power cords.
Lists specific components for the power supply and tuner units.
Continues the list of components for the tuner unit.
Lists resistors from R1 to R124 with their specifications.
Lists resistors from R125 to R262 with their specifications.
Lists resistors from R263 to R502 with their specifications.
Lists transistors from Q2 to Q14 with their specifications.
Lists transistors from Q25 to Q503 with their specifications.
Lists diodes from D1 to D19 with their specifications.
Lists diodes from D20 to D50 with their specifications.
Lists integrated circuits and hybrid components.
Lists integrated circuits and transistor components.
Lists components related to the front-end assemblies.
Lists resistors from R503 to R965 with their specifications.
Explains abbreviations for model and destination codes in the parts list.
Details power output, video, and tuner specs for USA/Canada models.
Covers general specifications and tone control details for USA/Canada models.
Details power output for the audio section in European models.
Provides FM and AM tuner specifications for European models.
Covers general specifications for European models.
Details power output for the audio section in other country models.
Provides FM and AM tuner specifications for other country models.
Covers general specifications for other country models.
Lists contact details for Kenwood service and support worldwide.
