Kenwood KRF-V6080D Bedienungsanleitung

DEUTSCH
AUDIO/VIDEO-MEHRKANAL-RECEIVER
KRF-V6080D
BEDIENUNGSANLEITUNG
KENWOOD CORPORATION
Hinweis zur mitgelieferten Fernbedienung
Verglichen mit herkömmlichen Fernbedienungen verfügt die mit diesem modell gelieferte Fernbedienung
über verschiedene Betriebsarten, mit denen andere AV-Komponenten gesteuert werden können. Lesen
Sie die Bedienungsanleitung aufmerksam durch, um sich mit den Funktionen und der Handhabung der
Fernbedienung vertraut zu machen, damit Sie die Fernbedienung effektiv einsetzen können.
Nur wenn Sie mit den Besonderheiten der Fernbedienung und mit der Umschaltung der Steuermodi
vertraut sind, können Sie die Geräte fehlerfrei steuern.
544001-06(DEU) 04.1.26, 0:50 PM1

Kenwood KRF-V6080D Specifications

Audio Specifications

rated power output during STEREO operation	100 W + 100 W
effective power output during SURROUND operation (FRONT 1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)	100 W + 100 W
effective power output during SURROUND operation (FRONT 1 kHz, 10 % T.H.D. at 6 Ω one channel driven)	120 W + 120 W
effective power output during SURROUND operation (CENTER 1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)	100 W
effective power output during SURROUND operation (CENTER 1 kHz, 10 % T.H.D. at 6 Ω one channel driven)	120 W
effective power output during SURROUND operation (SURROUND 1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)	100 W + 100 W
effective power output during SURROUND operation (SURROUND 1 kHz, 10 % T.H.D. at 6 Ω one channel driven)	120 W + 120 W
effective power output during SURROUND operation (SURROUND BACK 1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)	100 W
effective power output during SURROUND operation (SURROUND BACK 1 kHz, 10 % T.H.D. at 6 Ω one channel driven)	120 W
total harmonic distortion	0.05 % (1 kHz, 50 W, 6 Ω)
frequency response (CD/DVD)	20 Hz ~ 70 kHz, +0 dB ~ –3.0 dB
maximum input level (PHONO)	40 mV, 1.0 % T.H.D. at 1 kHz
signal to noise ratio (PHONO)	74 dB
signal to noise ratio (CD/DVD, TAPE, VIDEO 1, VIDEO 2, DVD/6CH)	95 dB
loudness control (VOLUME at –30 dB level)	+8 dB (100 Hz)
input sensitivity / impedance (PHONO)	7.5 mV / 27 kΩ
input sensitivity / impedance (CD/DVD, TAPE, VIDEO 1, VIDEO 2)	550 mV / 47 kΩ
input sensitivity / impedance (DVD/6CH INPUT)	550 mV / 15 kΩ
output level / impedance (TAPE REC)	550 mV / 1 kΩ
output level / impedance (PRE OUT SUBWOOFER)	1.5 V / 2.2 kΩ
output level / impedance (PRE OUT SURROUND BACK)	1.5 V / 2.2 kΩ
tone control (BASS)	±10 dB (at 100 Hz)
tone control (TREBLE)	±10 dB (at 10 kHz)

Digital Audio Specifications

sampling frequency	32 kHz, 44.1 kHz, 48 kHz, 96 kHz
input level / impedance / wave length (Optical)	–15 dBm ~ –21 dBm, 660 nm ±30 nm
input level / impedance / wave length (Coaxial)	0.5 Vp-p / 75 Ω

Video Specifications

VIDEO inputs / outputs (composite)	1 Vp-p / 75 Ω
S-VIDEO inputs / outputs (luminance signal)	1 Vp-p / 75 Ω
S-VIDEO inputs / outputs (chrominance signal)	0.286 Vp-p / 75 Ω
COMPONENT VIDEO inputs / outputs (luminance signal)	1 Vp-p / 75 Ω
COMPONENT VIDEO inputs / outputs (CB/CR-signal)	±0.32 Vp-p / 75 Ω

FM Tuner Specifications

tuning frequency range	87.5 MHz ~ 108.0 MHz
usable sensitivity (MONO)	1.3 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
usable sensitivity (STEREO)	45 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
total harmonic distortion (MONO)	0.2% (71.2 dBf input)
total harmonic distortion (STEREO)	0.8% (71.2 dBf input)
signal to noise ratio (MONO)	65 dB (40 kHz DEV., 71.2 dBf input)
signal to noise ratio (STEREO)	60 dB (46 kHz DEV., 71.2 dBf input)
stereo separation (DIN 1 kHz)	36 dB
selectivity (±300 kHz)	64 dB
frequency response (30 Hz ~ 15 kHz)	+0.5 dB, –3.0 dB

AM Tuner Specifications

tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod, S/N 20 dB)	16 µV / (600 µV/m)
signal to noise ratio (30% mod, 400 Hz)	50 dB (60 dBµV EMF input)

General Specifications

power consumption	280 W
AC outlet (SWITCHED)	total 90 W max.
dimensions (W)	440 mm (17-5/16")
dimensions (H)	143 mm (5-5/8")
dimensions (D)	303 mm (11-15/16")
weight (Net)	7.8 kg (17.2 lb)