To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-V7060D and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.05% |
| Input Sensitivity | 200 mV (Line) |
| Input Impedance | 47 kΩ (Line) |
| Power Output | 100 W per channel (8 ohms) |
| Tuning range | FM: 87.5 - 108 MHz, AM: 530 - 1700 kHz |
| Frequency Response | 10 Hz - 100 kHz |
| Output | Pre-out |
| Speaker Load Impedance | 8 ohms |
| Digital Inputs | optical, coaxial |
| Video Connections | Composite: 3 |
| Dimensions | 440 x 150 x 420 mm |
Identifies front panel controls and connectors with part numbers.
Identifies rear panel connectors, terminals, and output jacks with part numbers.
Illustrates electrical interconnections between major units and components.
Shows the physical placement of components on the main printed circuit board.
Illustrates the breakdown of front panel and main internal components.
Instructions for resetting the microcomputer to restore normal operation.
Lists standard accessories provided with the unit, such as antennas and remote control.
Covers model variations, tuner presets, and test mode operations.
Details microcomputer, peripherals, and various IC pin functions across multiple pages.
Outlines the procedure for adjusting the idle current in the audio section.
Lists all replaceable parts with codes and explains list abbreviations.
Details audio, video, tuner performance, power, dimensions, and weight.
