R
Ronald HuffJul 26, 2025
Why won't my Kenwood Subwoofer power on?
- RRyan MooreJul 26, 2025
If your Kenwood Subwoofer isn't powering on and the illumination isn't lighting up, there are several potential causes. First, check if the fuse is blown. Inspect the polarity of the power cord and ensure there are no shorts. Replace the fuse with one of the correct rating. Also, ensure the power supply pin (yellow) of the 10-pin connection cord is properly connected, referring to the connection example. Make sure the grounding terminal is securely attached to a metallic, uncoated part of the vehicle. Ensure the connector is fully inserted. Finally, verify that the negative cable of the car battery is connected.