Do you have a question about the Kenwood KX-5550 and is the answer not in the manual?
power consumption | 22 W |
---|
harmonic distortion | Less than 3.0% |
---|---|
wow and flutter | 0.07% (W.R.M.S.) |
signal-to-noise ratio (dolby NR off) | 55 dB |
signal-to-noise ratio (dolby C NR on) | 73 dB |
signal-to-noise ratio (dolby B NR on) | 66 dB |
frequency response (normal tape) | 20 Hz to 16, 000 Hz, ±3 dB |
frequency response (Cr02 tape) | 20 Hz to 17, 000 Hz, ±3 dB |
frequency response (metal tape) | 20 Hz to 18, 000 Hz, +3 dB |
input sensitivity/impedance (line in) | 100 mV/47 kQ |
---|---|
output level/impedance (line out) | 775 mV/1.4 kJl |
headphones output | 1.10 mW/32 0 |
width | 440 mm |
---|---|
height | 127 mm |
depth | 257 mm |
weight | 4.4 kg |